|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
05-06-2021, 01:29 PM | #21 |
Gone Wild
Join Date: Sep 2016
Location: Titusville, FL...Space Coast
Posts: 591
|
Re: 2002 DS IQ with upgraded motor/pack won't move
Just checking..You stated that you spliced the blue and white wires on the obc side of the connector...Since you removed the obc I'm assuming that you left the 6 pin connector in place and spliced it on that side...
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-06-2021, 11:31 PM | #22 | |
Not Yet Wild
Join Date: May 2021
Posts: 13
|
Re: 2002 DS IQ with upgraded motor/pack won't move
Quote:
Yes that is correct. That was the easiest way to do it IMO. |
|
05-07-2021, 05:44 PM | #23 |
Not Yet Wild
Join Date: May 2021
Posts: 13
|
Re: 2002 DS IQ with upgraded motor/pack won't move
So just an update on what I have found so far.
I have all of required inputs into the controller except for Pin 6 ( green wire) from the MCOR. I jumpered that connector to get 50vdc at pin 6 at the controller. With this input there the solenoid still does not engage nor do the wheels turn. The solenoid does engage if I short the small post to B-. Any thoughts on what I should replace?? Do I need a new MCOR because I am not getting 50vdc out with the pedal depressed? I do have 50vdc going in on the blue wire. I was thinking of getting an Alltrax 400xct controller with a 200A solenoid package from Scottyb. If I get this would you suggest the fan as well? Or just go with the Alltrax 500xct that comes with the fan and a 400A solenoid? Thanks for all of your input thus far! |
05-07-2021, 06:42 PM | #24 | |
Gone Wild
Join Date: Apr 2020
Location: 1000 Oaks, SOCAL
Posts: 424
|
Re: 2002 DS IQ with upgraded motor/pack won't move
Quote:
Just to double check you could run a continuity test across the Blue and Green wires with the pedal down. It's just an ON-OFF switch, but because of the casing it might not be easily accessible. If it was me, I would cut the casing open just to see how hard it would be. If you get a new MCOR be sure to get the one made in Mexico by ITW Switches, not the one made in China. Another test would be to check controller pin #12 to see if has continuity to GND when all the signals are input. The chip in the controller for grounding that line may be bad. The 200A solenoid with the 400A Alltrax controller is OK according to the wiring diagram, but I would get the 400A version, it's probably not that much more. The Alltrax 400A controller does not come with the fan, but I found one for $35 so I added it to ours. (Update: Alltrax sells it for $35, I found one for $25) With it jacked up, will the wheels turn when the solenoid is jumpered to close and the Foot Pedal is depressed? |
|
05-07-2021, 07:31 PM | #25 | |
Not Yet Wild
Join Date: May 2021
Posts: 13
|
Re: 2002 DS IQ with upgraded motor/pack won't move
Quote:
|
|
05-08-2021, 11:47 AM | #26 | |
Not Yet Wild
Join Date: May 2021
Posts: 13
|
Re: 2002 DS IQ with upgraded motor/pack won't move
Quote:
|
|
05-08-2021, 02:10 PM | #27 | |
Gone Wild
Join Date: Apr 2020
Location: 1000 Oaks, SOCAL
Posts: 424
|
Re: 2002 DS IQ with upgraded motor/pack won't move
Quote:
If the controller doesn't see the MCOR input for speed the motor probably won't turn. Also, is power getting thru the solenoid contacts to the controller/motor? |
|
Tags |
bandit, roypow, won't move |
|
|
Similar Threads | ||||
Thread | Forum | |||
Upgraded controller Precedent motor vs RXV motor torque | Electric Club Car | |||
36v or 48v solenoid upgraded battery pack | Electric EZGO | |||
do i need to buy an upgraded motor? | Electric EZGO | |||
Looking for an upgraded motor for a 72V gem | Electric golf carts | |||
2002 TXT PDS Wont Move - Need PDS Motor Test | Electric EZGO |