|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
10-08-2015, 02:58 PM | #1 |
Getting Wild
Join Date: Sep 2015
Location: SE FL
Posts: 83
|
Add Lights to Madjax Brush Guard
I'm pretty sure I have this brush guard, but in the installation video it appears that it has tabs for mounting lights, which mine does not have. Any suggestions on how to mount something like these lights without it looking too scabbed-together? I'm not a welder, and I'm not terribly excited about drilling holes in the tubing.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-09-2015, 10:36 AM | #2 |
Not Yet Wild
Join Date: May 2015
Posts: 41
|
Re: Add Lights to Madjax Brush Guard
most of my dealers are mounting them at an angle from the back side, as the light can be adjusted to tilt..
Some Actually Build small tabs.. Next Month we will have the brushguards with tabs on them, if that may be the route you want to go Hope that helps |
10-09-2015, 10:55 AM | #3 |
Not Yet Wild
Join Date: Nov 2014
Location: Prairieville, LA
Posts: 70
|
Re: Add Lights to Madjax Brush Guard
I ordered these off of eBay for mine. Got Got a pair for around $23
|
10-09-2015, 11:19 AM | #4 |
Getting Wild
Join Date: Aug 2015
Location: Savannah, GA
Posts: 127
|
Re: Add Lights to Madjax Brush Guard
A friend of mine took the bolts out of the roof at the front and put longer ones through there. Mounted them on the factory bolt holes on the nut side without having to do any additional drilling. Looks pretty slick.
|
10-09-2015, 12:14 PM | #5 |
Getting Wild
Join Date: Sep 2015
Location: SE FL
Posts: 83
|
Re: Add Lights to Madjax Brush Guard
Thanks for the replies guys.
I thought of going with some kind of roof-mount, but we're street legal and I don't want to blind folks by mistake. Seth, those mounts look like just the ticket, thanks! |
10-09-2015, 01:50 PM | #6 |
Getting Wild
Join Date: Sep 2015
Location: SE FL
Posts: 83
|
Re: Add Lights to Madjax Brush Guard
Any ideas how I'd modify this wiring diagram such that it only comes on when the ignition is on? 2012 electric Precedent with voltage reducer installed.
|
10-09-2015, 01:53 PM | #7 |
Getting Wild
Join Date: Aug 2015
Location: Savannah, GA
Posts: 127
|
Re: Add Lights to Madjax Brush Guard
Is the voltage reducer not already on ignition itself?
|
10-09-2015, 02:02 PM | #8 |
Getting Wild
Join Date: Sep 2015
Location: SE FL
Posts: 83
|
Re: Add Lights to Madjax Brush Guard
|
10-09-2015, 02:06 PM | #9 |
Been Wild Since Day 1
Join Date: Sep 2011
Location: Port Wentworth GA
Posts: 778
|
Here is some pics how we did ours. mine is the green cart .I'm going to redo mine and mount them on the back at the top and put a bigger one up front at the top . IMO I would mount them up high that way it shines down to where u want it. uploadfromtaptalk1444417205956.jpguploadfromtaptalk1444417292898.jpguploadfromtaptalk1444417333559.jpg
Sent from my SCH-I545 using Tapatalk |
10-09-2015, 02:07 PM | #10 |
Not Yet Wild
Join Date: Nov 2014
Location: Prairieville, LA
Posts: 70
|
Re: Add Lights to Madjax Brush Guard
I even have the same lights. They are mounted on a Jake's winch bumper. I just have the green covers for mine.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G1 brush guard | Gas Yamaha | |||
Brush Guard for G29 | Gas Yamaha | |||
brush guard | Electric EZGO | |||
EZGO Front Brush Guard/Off Road Lights *BGW Special* | Golf Carts and Parts | |||
Still Looking For A Used Brush Guard | Golf Carts and Parts |