|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-05-2016, 05:49 AM | #11 |
Gone Wild
Join Date: Feb 2016
Location: South GA
Posts: 227
|
Re: New alltrax xct 500 terminals bend?
I didn't have any issues with my tabs but feel sure it was because I routed/strapped wires in a way not to stress the tabs
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-05-2016, 09:01 AM | #12 |
Gone Wild
Join Date: Mar 2014
Location: South Carolina
Posts: 213
|
Re: New alltrax xct 500 terminals bend?
I just looked at it again, the tab easily pushed back in place....I guess I had a bad angle on my wrench, looks fine now, and connections are good and tight....
|
04-05-2016, 09:04 AM | #13 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,190
|
Re: New alltrax xct 500 terminals bend?
I thought those flexible tabs were strange too but as long as your wires are flexible enough and not causing them to bend and flex they are probably fine. The most important thing is that they be very low resistance connections.
|
04-05-2016, 05:44 PM | #14 |
Gone Wild
Join Date: Mar 2014
Location: South Carolina
Posts: 213
|
Re: New alltrax xct 500 terminals bend?
Well got it all hooked up, 22mph, and a ton of torque with 30" tires. I'm satisfied, wish I had more top end, but satisfied, just gota get use to this D&D vented torque motor, you can hear alot more it
|
04-06-2016, 12:18 PM | #15 |
Gone Wild
Join Date: Nov 2012
Posts: 197
|
Re: New alltrax xct 500 terminals bend?
Vented must be something new. I have a three year old D&D high torque that isn't vented. Don't know if I would like vented with the mud and water I go thru.
You will be happy with the torque and dependability of the D&D motor. |
04-06-2016, 01:30 PM | #16 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: New alltrax xct 500 terminals bend?
Venting has always been an option for street motors. Obvious benefits.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
easy way to bend square tubing | Design Center | |||
wanted bend/ junk aluminum cart wheel | Golf Carts and Parts | |||
roll cage bend radius? | Design Center | |||
Name Those Terminals | Electric Club Car |