|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
03-10-2017, 06:12 PM | #1 |
Not Yet Wild
Join Date: Oct 2013
Posts: 18
|
Mounting 2012 precedent voltage reducer.
First, I'm sorry I'm sure if I could get the search function to work on my phone I could find help with this.
I just picked up a 2012 48v precedent and a madjax Voltage with a fuse block. Now my only question is where the Heck do I mount these things??? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-10-2017, 08:16 PM | #2 |
Gone Wild
Join Date: Jun 2014
Location: Concord, NC
Posts: 354
|
Re: Mounting 2012 precedent voltage reducer.
Front cowl supports just behind the front shocks. If you look from under the front end looking back at the cart, you'll see right behind the shocks there will be a flat plate of steel and that is were Club Car mounts them. Just make sure we're ever you decide make sure air can move around it, they can get warm.
|
03-10-2017, 10:25 PM | #3 |
Not Yet Wild
Join Date: Oct 2013
Posts: 18
|
Re: Mounting 2012 precedent voltage reducer.
Should it be fine to get wet?
|
03-10-2017, 11:27 PM | #4 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: Mounting 2012 precedent voltage reducer.
The MadJax reducer is rather big and bulky. That's why I prefer the factory style reducer. Same output, just a little more costly but it's worth it when you try and mount it on a Precedent. I've mounted the MadJax reducers in the location NSane is describing, but there's no way to get to it to drill the correct mounting holes unless you take the entire front suspension off the cart. I ended up mounting it to a plate and threading holes in the plate that matched the factory mounting holes. I then counter-sunk the mounting holes and threaded four counter sink screws into the plate which allowed me to keep a flat mounting surface for the reducer. After that, I installed four more counter sink screws on the other side of the plate to hold the reducer onto the plate, also maintaining a flat surface. Once the reducer was mounted to the plate and tightened, I inserted the plate and reducer into the small cavity from underneath and put the four studs through the factory mounting holes and secured the entire assembly with lock-nuts.
|
03-11-2017, 06:24 AM | #5 |
Gone Wild
Join Date: Mar 2016
Posts: 264
|
Re: Mounting 2012 precedent voltage reducer.
You can go factory spot or on the inside of each wheel well to the metal plates high up. They are water resistant, just make sure to use good butt connectors and you will be fine.
Sent from my iPhone using Tapatalk |
03-11-2017, 10:54 AM | #6 |
Not Yet Wild
Join Date: Oct 2013
Posts: 18
|
Re: Mounting 2012 precedent voltage reducer.
Awesome, thanks for the pics. Now it's time to get wiring. For the fuse block is there room inside the dash somewhere?
|
03-11-2017, 12:31 PM | #7 |
Gone Wild
Join Date: Mar 2016
Posts: 264
|
Re: Mounting 2012 precedent voltage reducer.
Sent from my iPhone using Tapatalk |
03-11-2017, 03:07 PM | #8 |
Gone Wild
Join Date: Nov 2014
Location: New Albany, Indiana
Posts: 566
|
Re: Mounting 2012 precedent voltage reducer.
Man Patela2oh!
Maybe you should enlarge those pics, tough to see! Just kidding, lol. |
03-12-2017, 12:41 AM | #9 |
Not Yet Wild
Join Date: Oct 2013
Posts: 18
|
Re: Mounting 2012 precedent voltage reducer.
|
03-12-2017, 06:09 AM | #10 |
Gone Wild
Join Date: Mar 2016
Posts: 264
|
Re: Mounting 2012 precedent voltage reducer.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G19E Voltage Reducer Mounting Location | Electric Yamaha | |||
Voltage Reducer Mounting Location RXV | Electric EZGO | |||
Precedent 5 wire 48v voltage reducer. | Electric Club Car | |||
2012 rxv 20 amp voltage reducer | Electric EZGO | |||
Voltage reducer question 05 precedent | Electric Club Car |