lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car
Electric Club Car Electric DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-31-2018, 05:15 PM   #1
dundeebarnbuggy
Gone Wild
 
dundeebarnbuggy's Avatar
Club Car
 
Join Date: Oct 2016
Location: Dundee quebec
Posts: 2,809
Default Dpi setting for Crown?

I have done a search and came up inconclusive. Does anybody know the setting for a DPI charger with the jumper pins for Crown [CR-190] batts? Found a setting for everything but!
dundeebarnbuggy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-31-2018, 09:03 PM   #2
WalterM6
Gone Wild
 
WalterM6's Avatar
Club Car
 
Join Date: Apr 2017
Posts: 1,667
Default Re: Dpi setting for Crown?

With the Gen 4 they call for Mode 4 which is 57.6 volts. Mode 3 on the Gen 3 charger is also 57.6v.
WalterM6 is offline   Reply With Quote
Old 11-01-2018, 01:44 PM   #3
dundeebarnbuggy
Gone Wild
 
dundeebarnbuggy's Avatar
Club Car
 
Join Date: Oct 2016
Location: Dundee quebec
Posts: 2,809
Default Re: Dpi setting for Crown?

Awesome! Thanks!
dundeebarnbuggy is offline   Reply With Quote
Old 11-02-2018, 09:28 AM   #4
1sharphook
Gone Wild
 
Join Date: Aug 2016
Posts: 163
Default Re: Dpi setting for Crown?

Quote:
Originally Posted by dundeebarnbuggy View Post
I have done a search and came up inconclusive. Does anybody know the setting for a DPI charger with the jumper pins for Crown [CR-190] batts? Found a setting for everything but!
Dundee,

The recommended mode for Crown can be seen on Page 5 of the Gen 3 manual:

http://www.dpipower.com/store/MNUL/General_Chargers.pdf

I also have recent confirmation from DPI that Mode 4 is their recommendation and this applies to both CR-165 and CR-190 batteries. I have been using Mode 4 on my CR-165 batteries for 9 months now. I can can confirm no excessive gassing, my electrolyte levels remain at their factory fill levels ~ 3/4" above the plates, and I have experienced no significant temperature elevation using Mode 4.
1sharphook is offline   Reply With Quote
Old 11-02-2018, 11:05 AM   #5
dundeebarnbuggy
Gone Wild
 
dundeebarnbuggy's Avatar
Club Car
 
Join Date: Oct 2016
Location: Dundee quebec
Posts: 2,809
Default Re: Dpi setting for Crown?

Thanks AGAIN! I put my manual in a safe place,,, and now I'll be dammed if I can't find the SOB. Duhh.
dundeebarnbuggy is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
Crown batteries vs. Others Electric EZGO
Crown CR 165, 8 volt Electric Club Car
Crown Batteries Extreme DC!
Crown and Trojan Battery Info just received from Crown dealer Electric EZGO
Crown Batteries?? Electric Yamaha


All times are GMT -5. The time now is 04:56 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.