|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-18-2012, 10:26 AM | #21 |
Not Yet Wild
Join Date: Dec 2011
Location: Mojave Desert
Posts: 65
|
Re: Input shaft leaks oil into motor
I have changed the sealed bearing and the oring several times but it still leaks, EZGO has a new seal that fits between the snap ring and the bearing on the motor side. it looks like a big washer. I hope this works I have tried sealing the bearing in but it still leaks. the weight of the motor hanging on the gear box may have tweaked it a bit. Oh well keep on trying to stop it.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-06-2012, 08:15 AM | #22 |
Not Yet Wild
Join Date: Apr 2009
Location: King,Nc.
Posts: 73
|
Re: Input shaft leaks oil into motor
You couldn't by chance post the part number for that seal could you my local dealer for some reason tends to lead me in the wrong direction sometime's he's not a tech in shop no more. So he's not up to par "sometimes" LOL. I just had to buy a whole new headlight wiring harness just because he didn't know the end bulb unplugged. He did however teach me a lesson to do a little checking for myself before I just drive over and spend money that I DON"T have to waste.Thank for your time.
|
04-06-2012, 02:20 PM | #23 |
Not Yet Wild
Join Date: Dec 2011
Location: Mojave Desert
Posts: 65
|
Re: Input shaft leaks oil into motor
sorry but I do not know the part#
|
04-06-2012, 02:45 PM | #24 |
Gone Wild
Join Date: Oct 2010
Posts: 374
|
Re: Input shaft leaks oil into motor
You could probably match you a ring up at the auto parts store.
|
04-06-2012, 06:58 PM | #25 |
Not Yet Wild
Join Date: Dec 2011
Location: Mojave Desert
Posts: 65
|
Re: Input shaft leaks oil into motor
This seal fits between the snap ring and motor side input bearing, pretty special type
|
04-06-2012, 09:57 PM | #26 |
Gone Wild
Join Date: Oct 2010
Posts: 374
|
Re: Input shaft leaks oil into motor
If it is the one i replaced it is just an boring.
|
04-08-2012, 09:02 PM | #27 |
Gone Wild
Join Date: Oct 2010
Posts: 374
|
Re: Input shaft leaks oil into motor
An "O-ring" I meant to say. It was also a boring job but I meant O-ring.
|
04-09-2012, 08:30 AM | #28 |
Not Yet Wild
Join Date: Dec 2011
Location: Mojave Desert
Posts: 65
|
Re: Input shaft leaks oil into motor
its not an O ring, the Oring fits around the bearing and seats in the case. this is a thin flat washer
|
04-09-2012, 08:52 AM | #29 |
Gone Wild
Join Date: Oct 2010
Posts: 374
|
Re: Input shaft leaks oil into motor
Oh, mine does not have that. Just an o-ring that sits in a groove sealing the outside of the bearing and the gear case.
|
04-09-2012, 09:20 AM | #30 |
Not Yet Wild
Join Date: Dec 2011
Location: Mojave Desert
Posts: 65
|
Re: Input shaft leaks oil into motor
I changed the O ring and Bearing a couple of times and I still had a leak. I tried sealing the bearing in but it still leaked, the EZGO dealer told me about this washer that EZGO added to their Input Shaft kit that shows the Flat washer/seal that fits between the Snap Ring and Bearing.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Input shaft | Electric EZGO | |||
G16 input shaft | Gas Yamaha | |||
rubber bumper between motor and input shaft needed? | Electric EZGO | |||
G9 Input Shaft? | Gas Yamaha | |||
need input shaft for G2 | Golf Carts and Parts |