Cart goes forward just clicks in reverse

[shadowman]

i,m not sure how it was wired but there should be a wire from the f&r to i beleive the #3 battery.......................................

[Poolside1200]

Originally Posted by shadowman

did you replace all the solenoids? the last one i beleive is also for reverse as well as speed.............you can try jacking the cart up and jumping that solenoid see if you get reverse.......is this the cart you made the bussbar for??............................................. ..

When you say jumping the last solenoid don't understand I put a volt meter on the last solenoid small terminals and pressed pedal 36.8 I be leave

[Poolside1200]

Yes

[Stevegrmich]

Could he not jumper the two bottom terminals on the f/r switch to see if he gets full speed reverse? Would this not prove no cable/wire is connected for 1/2 speed reverse?

[Poolside1200]

Jump the 2 bottom terminals? Bottom neg and pos, a wire from one to the other?

[Stevegrmich]

Originally Posted by Poolside1200

Jump the 2 bottom terminals? Bottom neg and pos, a wire from one to the other?

Wait for ScottyB or someone to answer this to be certain . . .

[scottyb]

Can poolside post a pic of his F&R connections? That would save 3 pages of questions.

[Stevegrmich]

Originally Posted by scottyb

Can poolside post a pic of his F&R connections? That would save 3 pages of questions.

See post #10, previous page of this thread . . .

[Poolside1200]

I fineally figured it out it was right there in front of me after every body said 2 bottom posts are both positive but reverse is 18 v so 3rd battery through out 18 volts thanks

[Stevegrmich]

Originally Posted by Poolside1200

I fineally figured it out it was right there in front of me after every body said 2 bottom posts are both positive but reverse is 18 v so 3rd battery through out 18 volts thanks

Whewwww!!! Congrats! . . .