|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-11-2012, 09:25 PM | #11 |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-11-2012, 09:35 PM | #12 |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
The pack is reading 38.5 that's as accurate as my meter provides
Sent from powders back pocket |
07-12-2012, 09:17 AM | #13 |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
Ok, do extreme load pack reads 33.9 and going up a steep grade consistently reads 35.7. Can anyone help me out???
Sent from powders back pocket |
07-12-2012, 02:44 PM | #14 |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
Anybody?
Sent from powders back pocket |
07-13-2012, 11:58 AM | #15 |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
Still needing help
Sent from powders back pocket |
07-13-2012, 02:09 PM | #16 | |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 1997 Ez-Go TXT Series
Quote:
so your problem is that, you can drive the cart for 10 minutes, but when you park,m and get back on it to take off it will not move?? |
|
07-13-2012, 03:15 PM | #17 |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
After a 12 hour sit the pack will read 38.5...
Going up a very steep hill it read at the lowest 33.9, but more consistently read in the 35 volt range Update: charged last night, unplugged from cart and it did not budge, now I know it's not a battery issue... Sent from powders back pocket |
07-13-2012, 03:23 PM | #18 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: 1997 Ez-Go TXT Series
When you upgraded the HD FNR switch, was it all new, or just the cam up grade in the old housing ? maybe it needs to be tightened, the nut in the center, and just because the solenoid is new does not mean that it can;t be bad,
|
07-14-2012, 12:10 PM | #19 |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
But on FnR is tight, and the switch is completely new, not just the cam...last night I replaced a corroded connector on the Reed switch...how can I check the solenoid???
Sent from powders back pocket |
07-14-2012, 12:31 PM | #20 |
Not Yet Wild
Join Date: Jul 2010
Location: texas
Posts: 69
|
I think my solenoid is bad, let me know If I'm right, I was just replacing the little black wire from the small terminal on my solenoid to the b negative post on my controller, and I had the battery pack unhooked. After getting the wire replaced, I hit the pedal and the solenoid clicked but I didn't hook up the battery pack yet, so I hooked it up and same thing...click, so it seems I'm not getting power to my electronics. Does this sound right?
Sent from powders back pocket |
|
|
Similar Threads | ||||
Thread | Forum | |||
Club Car Series Controller + EZGO Series Wound Motor | Electric Club Car | |||
1997 Series Stock TXT with 23" Tires | Electric EZGO | |||
1997 EZGO gas 1997 not firing | Gas EZGO | |||
1997 DCS value | Electric EZGO | |||
6x6V series or 2x3x12V Series/parallel | Electric golf carts |