|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-25-2012, 10:25 PM | #1 |
Gone Wild
Join Date: Aug 2012
Location: Tampa Bay area
Posts: 220
|
Need sage reduceruggestion for connecting items to the volt
2002 Club Car DS. 48V system. 6, 8 volt batts, Currently running a stereo and two diff sets of lights.
This is my first cart. Just git done adding camo wrap to it. I r&I'd everything and now puting it all back. The headlights don't work now. It's the bulbs. Now adding the new set of headlights abd see thatthe original headlights, stereo and LED lights are wired to the last few batteries. The cart already has a reducer, but only the second set of light and cig lighter sre attached to it. So, what is the best way to make the connections for several accesories? Thanks! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-26-2012, 05:35 AM | #2 | |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: Need sage reduceruggestion for connecting items to the volt
Quote:
|
|
09-26-2012, 05:43 AM | #3 |
Gone Wild
Join Date: Aug 2012
Location: Tampa Bay area
Posts: 220
|
Re: Need sage reduceruggestion for connecting items to the volt
Thanks Steve! Any suggestions on a specific fuse box?
BTW, just reading my original post. WOW! don't post when you're sleepy!!! |
09-26-2012, 06:09 AM | #4 |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: Need sage reduceruggestion for connecting items to the volt
. . . I just checked where I bought mine, and the guy does not have any for sale right now . . . the one I have includes negative distribution points as well as the fused positive distribution points (spade connectors) . . . this enables any/all accessories to be wired to the fuse block with both the pos and neg wires that run the accessory . . . the voltage reducer provides the 12v feed to the block . . . don't have to run accessory's neg wire to battery pack with this style fuse block, so a cleaner looking battery compartment . . . if you look at my post #15 at this link, you will see a picture that shows my reducer mounted on the passenger side and the fuse block on the left side in second picture:
MY 06 DS |
09-26-2012, 08:00 AM | #5 |
Gone Wild
Join Date: Aug 2012
Location: Tampa Bay area
Posts: 220
|
Re: Need sage reduceruggestion for connecting items to the volt
Thanks again Steve!!! Any suppliers I might search for a similar item?
|
09-27-2012, 06:32 AM | #6 |
Medicare Recipient
Join Date: Jun 2011
Location: West Michigan
Posts: 3,541
|
Re: Need sage reduceruggestion for connecting items to the volt
. . this is the type I am talking about . . . note the blade connector points on the right side (for negative wire to accessories) . . . not sure if any of the site sponsors carries this style or not, but at least you see what I am talking about . . the price is about right also . . .
|
09-27-2012, 09:30 AM | #7 |
Gone Wild
Join Date: Aug 2012
Location: Tampa Bay area
Posts: 220
|
Re: Need sage reduceruggestion for connecting items to the volt
Thanks!!! YOU DA MAN!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Frame off restore, factory items? | Electric EZGO | |||
Looking For These Detail Items... | Electric Club Car | |||
Powering Aux Items w/o Voltage Reducer | Electric EZGO | |||
some club car items | Golf Carts and Parts |