|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
|
Thread Tools | Display Modes |
06-12-2016, 07:20 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2016
Posts: 18
|
G1 clutch cover re-assembly help!
Hi guys. Thanks for the help in replacing my crankshaft seals, its running great..... Saturday I was trying to uproot some old azaleas by pulling backwards with my G1 and the clutch assembly unscrewed itself. And now even tho I was able to re assemble it a couple of months ago, I CANNOT seem to get the clutch cover back on. The pivoting weights dont seem to allow me to reseat it completely on the splines to then let me screw the long bolt back in. Any suggestions? I tried a rubber band with some dental floss attached but still no luck. Thanks!
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FnR assembly cover | Electric EZGO | |||
| Help to ID this clutch assembly | Big Block Talk! | |||
| Front Clutch Assembly | Gas Yamaha | |||
| Driven clutch dust cover very close to engine air cover | Gas EZGO | |||
| Clutch assembly | Golf Carts and Parts | |||
Threaded Mode