|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-12-2018, 10:03 PM | #1 |
Not Yet Wild
Join Date: Mar 2016
Posts: 30
|
G16 pitman arm - tie rod placement?
1996 G16A
replacing loose front parts and got looking at pitman arm on bottom of steering gear. it looks bent and one tie rod is on the front and other goes thru from the rear? right side is at a angle compared to left I looked at Yamaha parts but picture only shows one side. can anyone take a pic of theirs, please added pics of mine, put back together like it was. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-12-2018, 10:12 PM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G16 pitman arm - tie rod placement?
Pretty sure that is correct!! My G8 is that way!!
Dave in VA will see this and verify!! |
10-13-2018, 06:37 AM | #3 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
|
Re: G16 pitman arm - tie rod placement?
That looks correct, as far as I can tell...
|
10-13-2018, 08:41 AM | #4 |
Not Yet Wild
Join Date: Mar 2016
Posts: 30
|
Re: G16 pitman arm - tie rod placement?
thanks for the reply's
love this site |
10-13-2018, 06:44 PM | #5 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: G16 pitman arm - tie rod placement?
G2/g9 similar.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Has anyone extended their pitman arm? | Gas Yamaha | |||
G8 steering box pitman arm clunk. | Gas Yamaha | |||
1991-2002 G9, G14, G16, and G19 Idler and pitman arm | Golf Carts and Parts | |||
Removing the pitman arm from a Yamaha G14? | Gas Yamaha | |||
g1 pitman/idler arm bent?? | Gas Yamaha |