|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-13-2013, 07:25 AM | #1 |
Not Yet Wild
Join Date: Jan 2011
Location: Nahunta, GA
Posts: 38
|
Front Clutch Assembly
I think the front clutch assembly went out on my G-8 yesterday. I was just riding along and it was like someone throwed it up in neutral. She don"t move unless you pusher her now. I just redone the rear with the Plowman's belt and pulley's. Do I have to buy a complete new front clutch or can I just buy the repair kit( which is the weights)? Please help
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-13-2013, 07:45 AM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Front Clutch Assembly
Check shifter linkage first, don't see how a primary would just quit, without some kind of noise or warning.
|
08-13-2013, 05:16 PM | #3 |
Not Yet Wild
Join Date: Jan 2011
Location: Nahunta, GA
Posts: 38
|
Re: Front Clutch Assembly
Shifter linkage fine. Yes it had been making some noise, didn't know it was coming from that though.
|
08-13-2013, 10:17 PM | #4 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Front Clutch Assembly
Take the cover off and see what doesn't look right.
|
08-15-2013, 03:43 PM | #5 |
Not Yet Wild
Join Date: Jan 2011
Location: Nahunta, GA
Posts: 38
|
Re: Front Clutch Assembly
This is what I found when I took cover off. So, do I can replace just the one that is broke or do I need to go ahead and replace all three and be on the safe side?
|
08-15-2013, 04:34 PM | #6 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Front Clutch Assembly
Me being me, I would replace all 3. But look at the other 2 and see what wear in on them. Also, Curti in the G8 club may have a whole assembly for sale.
|
08-15-2013, 04:46 PM | #7 |
Not Yet Wild
Join Date: Jan 2011
Location: Nahunta, GA
Posts: 38
|
Re: Front Clutch Assembly
Thanks so much for helping me! I'll check with curti.
|
08-15-2013, 09:08 PM | #8 |
Not Yet Wild
Join Date: Jan 2011
Location: Nahunta, GA
Posts: 38
|
Re: Front Clutch Assembly
What does it take to become a member of the G-8 Club Mike Mac?
|
08-15-2013, 09:36 PM | #9 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: Front Clutch Assembly
Just a picture of your G8!! You don't even have to have a G8. Just walk in and post!! But... Are you sure you want to join G8?? Have you read G8??
Just kidding, Your very WELCOME!! Com-on!! Used to have to read the first post and promise to live up to its mission statement!! And hijack as often as possible!! |
08-15-2013, 09:38 PM | #10 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: Front Clutch Assembly
I think you just have to "post" in their thread....
http://www.buggiesgonewild.com/gas-y...ease-post.html |
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO 2008 Castle Nut Size Front Wheel Assembly | Gas EZGO | |||
Wanted EZGO RXV front shock and strut assembly | Golf Carts and Parts | |||
EZ-GO front wheel hubs assembly | Golf Carts and Parts | |||
Precedent Front End Assembly | Electric Club Car | |||
Clutch assembly | Golf Carts and Parts |