|
03-26-2009, 03:36 PM
|
#1 |
|
Taters...
Join Date: Sep 2008
Location: Deep in the heart
Posts: 1,218
|
Shorter belt
How loose should the belt be when the cart is off. I put a shorter belt on a while back and it seems a little loose. I don't get it. Anybody have a pic of what the belt should look like?
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-26-2009, 03:43 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Shorter belt
Hang loose pic on the way.....
 |
|
|
|
|
03-26-2009, 03:50 PM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Shorter belt
Pics of the 00 workhorse. Stock drive clutch. CPP machined driven clutch (notice machining forces belt up out of the clutch). Newer stock belt.....hope this helps.
|
|
|
|
|
03-26-2009, 04:10 PM
|
#4 |
|
Taters...
Join Date: Sep 2008
Location: Deep in the heart
Posts: 1,218
|
Re: Shorter belt
Thanks scottyyb, that does help. That is what mine looks like, I just can't figure out why I am having the problem that I am... On a little incline in dirt cart won't go, it acts like the belt is spinning without turning the cart. If I get off and give it gas and a little push it will go. Either I need to lose some weight or get more power. Maybe both.
|
|
|
|
|
03-26-2009, 04:28 PM
|
#5 |
|
****tard supreme
Join Date: Jun 2008
Location: waldo,wisconsin
Posts: 5,401
|
Re: Shorter belt
what clutch are you running?
|
|
|
|
|
03-26-2009, 04:31 PM
|
#6 |
|
Taters...
Join Date: Sep 2008
Location: Deep in the heart
Posts: 1,218
|
Re: Shorter belt
Stock, not sure what it is. I have the 11hp.
|
|
|
|
|
04-24-2009, 09:42 AM
|
#7 |
|
Not Yet Wild
Join Date: Dec 2008
Location: Riverview FL
Posts: 32
|
Re: Shorter belt
Hey Scotty,
I see the # on your belt is 10979 what is it Is it the one inch shorter belt Thanks Bill. |
|
|
|
|
04-24-2009, 09:49 AM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Shorter belt
NO. that is the stock belt. Notice the belt is pushed up out of the pulley from the machining that TOM at CPP did for me.
The shorter belt is OEM #22337-G1. It is 1" shorter or 41" by 1 3/16ths wide, commonly known as the 2 stroke belt for 1989-91  The machining and the shorter belt together is too much. THe belt is too tight and shifting becomes very hard....... |
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Shorter Belt? | Gas EZGO | |||
| shorter belt | Gas EZGO | |||
| Shorter belt on a G8 4 person... | Gas Yamaha | |||
| Shorter belt | Gas EZGO | |||
| shorter belt ? | Gas EZGO | |||
Linear Mode
