|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-14-2009, 12:08 AM | #1 |
Not Yet Wild
Join Date: Nov 2009
Location: San Antonio, Texas
Posts: 15
|
Starter/ crank pulley needed (drive clutch?)
I ws attempting to change the crank seals on my G1 and busted the starter/ generator pulley on the crank. i think its the drive clutch assembly...
1.) Where can I get one (pully alone)? 2.) what is the easiest way to get the old one off? I used a puller.....lubed it up....then heated it...and no go. Is there a special bolt you use to remove the entire assembly? 3.) If I need a new drive clutch assembly.........does anyone have one used they will part with? "Walking again" JHK |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-14-2009, 08:06 AM | #2 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,053
|
Re: Starter/ crank pulley needed (drive clutch?)
You will need a Yamaha drive clutch puller. http://www.cartpartsplus.com/yamaha-...ch-puller.html
Check the for sale section or with our site sponsors for the clutch. |
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
11-14-2009, 10:12 AM | #3 |
Not Yet Wild
Join Date: Nov 2009
Location: San Antonio, Texas
Posts: 15
|
Re: Starter/ crank pulley needed (drive clutch?)
Thanks for the response. I assume if I need the bolt pictured in the link, the pulley I busted in in fact part of an "assembly" (meaning this pulley is pressed onto another shaft t which the clutch rides as well-correct?).
|
11-15-2009, 12:36 PM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,053
|
Re: Starter/ crank pulley needed (drive clutch?)
Right, the pulley is part of the stationary sheave assembly.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
11-15-2009, 12:52 PM | #5 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: Starter/ crank pulley needed (drive clutch?)
|
11-15-2009, 01:43 PM | #6 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,053
|
Re: Starter/ crank pulley needed (drive clutch?)
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
11-15-2009, 07:30 PM | #7 |
Gone Wild
Join Date: Nov 2009
Location: Kentucky
Posts: 287
|
Re: Starter/ crank pulley needed (drive clutch?)
|
11-15-2009, 08:32 PM | #8 |
Not Yet Wild
Join Date: Nov 2009
Location: San Antonio, Texas
Posts: 15
|
Re: Starter/ crank pulley needed (drive clutch?)
I'll take it if you have one for sale...just let me know the price.
|
11-15-2009, 08:50 PM | #9 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,053
|
Re: Starter/ crank pulley needed (drive clutch?)
Let me figure out what it's worth.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G1 Crankcase Pulley | Gas Yamaha | |||
drive pulley stuck | Gas Club Car | |||
1964 HD Model D Rotor for Starter-Generator needed | Gas Harley Davidson | |||
Need Workhorse Driven Pulley | Gas EZGO | |||
1997 TXT Restoration CRANK NEEDED !!! | Gas EZGO |