lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 03-08-2010, 04:53 PM   #1
ezgokilla
Not Yet Wild
Yamaha
 
Join Date: Feb 2010
Location: southwest GA
Posts: 71
Default My custom 3" filter setup /pictures

Here my 3" filter set-up i was running awhile back.Have not tried it with my engine since it's been rebuilt and i dont not have the jet kit for it so it probably wouldnt run good.


A piece of sheet metal with a 3" adapter screwed to it with a loc-tite seal .
drilled 3 holes for the intake manifold to bolt to.And a 1" hole for the intake itself .


here is the g16 intake adapter with the 90 degree intake elbow .Never had it touch the seat even when fly through pot holes .It never loosen or fell off very snug fit like stock air intake but looks better




I wrapped red electrical tape around it for a even more tight fit.Because i ride very rough and didnt want it top pop off




all you seen when you open the seat is a huge cone filter with the chrome 90 degree elbow
ezgokilla is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 03-08-2010, 08:21 PM   #2
yamahag9er
Fry's Golf Carts
 
yamahag9er's Avatar
Club Car
 
Join Date: Dec 2006
Location: Central Michigan
Posts: 857
Default Re: My custom 3" filter setup /pictures

Looks very cool. I would like to see a picture of it installed on the cart.
yamahag9er is offline   Reply With Quote
Old 03-08-2010, 09:02 PM   #3
TheNewGuy
Admin/Moderator
 
TheNewGuy's Avatar
Yamaha
 
Join Date: Dec 2006
Location: Ohio
Posts: 18,009
Default Re: My custom 3" filter setup /pictures

Quote:
Originally Posted by yamahag9er View Post
Looks very cool. I would like to see a picture of it installed on the cart.
I agree!

TheNewGuy is offline   Reply With Quote
Old 03-08-2010, 10:19 PM   #4
ezgokilla
Not Yet Wild
Yamaha
 
Join Date: Feb 2010
Location: southwest GA
Posts: 71
Default Re: My custom 3" filter setup /pictures

heres a vid of it running. this is whith a shot piston vavles etc hole engine blown . havnt tried it since cpp rebuilt it .
ezgokilla is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Custom Pictures Anyone??? Electric EZGO
Custom "BANDIT" Trans Am Themed EZ GO ~ Must See ~ Golf Carts and Parts
"Project Take Forever" (Pictures) Electric EZGO
G16 "Power" Air Filter and Jet Opinions....? Gas Yamaha
remote oil filter setup Big Block Talk!


All times are GMT -5. The time now is 06:38 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.