|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
08-06-2010, 06:22 PM | #1 |
Gone Wild
Join Date: Jul 2010
Location: Livoni MI
Posts: 157
|
G9 belts Installation tips?
I'm going to be replaceing the 2 old belts on my Yamaha G9 with new ones. Does anyone have any tips or anything I should look for when replacing.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-07-2010, 09:11 AM | #2 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G9 belts Installation tips?
Tim, if you go to: yamahagolfcar.com, you can down load (pdf) the owners manual for your G9. It will help you with general maint.
|
08-08-2010, 09:48 PM | #3 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: G9 belts Installation tips?
Check the tension cable under the gen pulley they break. Check the inside of the clutches the alum sides wear and get rounded out, some wear from sand and actually wear through and get holes in them and cut the belt up. They hardly shift at that point. You should clean and lube the clutches if they are dirty. If not put one pump of grease in each once or twice a year. The new drive belt may be sticky and drag at idle for a little while.
|
Tags |
clutch belt, yamaha |
|
|
Similar Threads | ||||
Thread | Forum | |||
tips on engine R&R | Gas EZGO | |||
Any tips for more power from a 295? | Gas EZGO | |||
Newbie looking for tips | Electric EZGO | |||
Tips on rear oil | Gas Club Car | |||
TIPS!! Have any to give?? | Gas Yamaha |