Anyone running gauges?

[F239141]

My friends 1997 C.C. has a C.C. branded gas gauge in the dash. I haven't seen one available to buy but got thinking what about an oil pressure gauge, and maybe a oil temp gauge too.

Has anyone done this? If so what pressure or temp does or should the oil run?

Pics would be cool too

[Dave in VA]

These are Sunpro gauges from Advance Auto. Volts, electrical oil pressure, and cylinder head temp. The BB has an oil cooler--I figured head temp might be useful on an air cooled engine.

[F239141]

Originally Posted by Dave in VA

These are Sunpro gauges from Advance Auto. Volts, electrical oil pressure, and cylinder head temp. The BB has an oil cooler--I figured head temp might be useful on an air cooled engine.

Do you have the thermo coupler in the head some how or is it wedged between the fins??

Thanks for the pic!!

[didjidude]

I put a Napa universal fuel gauge on my G2, I got tired of running out of gas. I would like to add a volt meter and tachometer in the future.

[lockman1]

ProjectClubCar did a pretty nice set up!

http://www.buggiesgonewild.com/gas-c...uge-set-s.html

http://www.buggiesgonewild.com/gas-c...cs-gauges.html

[Dave in VA]

Originally Posted by F239141

Do you have the thermo coupler in the head some how or is it wedged between the fins??

Thanks for the pic!!

It's wedged between the fins and the shroud on the head.

[etech]

Here is a pic of my set-up. I'm running a Glowshift tach and Sunpro fuel, head temp, volts, and oil pressure gauges.



Here is a link to thread where I discussed the installation of these gauges.

http://www.buggiesgonewild.com/gas-c...precedent.html

Regards,

Ed

[ProjectClubCar]

Originally Posted by lockman1

ProjectClubCar did a pretty nice set up!

http://www.buggiesgonewild.com/gas-c...uge-set-s.html

http://www.buggiesgonewild.com/gas-c...cs-gauges.html

thanks lock.........it did come out sweet.....thanks to all who help me get it there.......now i get to do it over again.......hope it is as easy on the new v-twin as it was on the fe 290.........all so bought a different tach, one you can see at night.......i got a new piece of birch, so after the motor install, will do a new dash, but still keep it old school.......