![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Gone Wild
![]() Join Date: Dec 2015
Location: Texas
Posts: 526
|
![]() I purchased some H3 LED bulbs to replace my 55W head lights in my TXT.
Bought them on eBay and the bulb was advertised at .43 inches wide. Feeding the bulb through the back of the assembly it will fit half way down the bulb. You can see the end of the bulb is .43 inches, but just past the LEDs on the side, the housing is actually .48 inches. At the round part. At .48 inches, the bulb will not fit through the housing. Any suggestions on which bulbs will fit? Here are my pictures...they will show the measurements and problem. ![]() ![]() Sent from my Nexus 6 using Tapatalk |
![]() |
![]() |
![]() |
#2 |
Over This Interview Is...
![]() Join Date: Jun 2012
Location: AZ
Posts: 17,443
|
![]() Maybe relieve the hole on the housing by .05"??? I have not had good luck with H3 leds, mine were so oversized it was a joke.
|
![]() |
![]() |
![]() |
#3 |
Getting Wild
![]() Join Date: Nov 2015
Location: Seattle,WA /Sebastian,FL
Posts: 106
|
![]() is the housing metal or glass?
If metal then file or drill. If glass then ???? |
![]() |
![]() |
![]() |
#4 |
Gone Wild
![]() Join Date: Dec 2015
Location: Texas
Posts: 526
|
![]() These LED lights are just a pain to find.... It seems like there would be some standards.
I guess with China probably making these, the standards go out the window. I will have to look again to see if the housing is metal, glass, or perhaps plastic. I was hoping not to have to macgyver the thing. Sent from my Nexus 6 using Tapatalk |
![]() |
![]() |
![]() |
#5 |
Not Yet Wild
![]() Join Date: May 2015
Location: San Antonio
Posts: 5
|
![]() I replaced mine on my 01 And 06 txt with replacement bulbs from super bright LEDs . Haven't had any issues . It's the 881 can bus led bulb -27 (821-w27-CB )
|
![]() |
![]() |
![]() |
#6 |
Gone Wild
Join Date: Jul 2012
Location: maryland
Posts: 818
|
![]() Had same issue, this item on ebay solved my issue and is super bright
# 381422637786 |
![]() |
![]() |
![]() |
#7 |
Gone Wild
![]() Join Date: Dec 2015
Location: Texas
Posts: 526
|
![]() Thanks for the info...just ordered them.
Sent from my Nexus 6 using Tapatalk |
![]() |
![]() |
![]() |
#8 |
Gone Wild
![]() Join Date: Dec 2015
Location: Texas
Posts: 526
|
![]() Got the leds installed today... They worked perfectly. Thanks again for the information on the correct Leds.
Sent from my Nexus 6 using Tapatalk |
![]() |
![]() |
![]() |
#9 |
Gone Wild
![]() Join Date: Dec 2015
Location: Texas
Posts: 526
|
![]() After installing and using the Led bulbs, they are definitely bright, but don't have the same distance of brightness as my old H3 bulbs.
They are not very effective past 15 feet ahead of the cart. Any suggestions? I am thinking a led light bar as well now, but not sure where to mount it. Sent from my Nexus 6 using Tapatalk |
![]() |
![]() |
![]() |
#10 |
Gone Wild
![]() Join Date: May 2012
Location: Rio Verde, Az
Posts: 5,901
|
![]() Here is the problem with these LED H3 lamps: THey are way longer than the standard halogen bulb they replace. They are not at the focal point of the reflector so they are not focused at all. I have the same problem on my Yamaha with them. They are useless as headlight bulbs.
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
OEM turn signal bulb size? | Gas Club Car | |||
688 bulb | Gas Club Car | |||
688 bulb | Electric Club Car | |||
Burned out bulb | Tomberlin | |||
headlight bulb | Electric Club Car |