![]() |
|
![]() |
#1 |
Not Yet Wild
![]() Join Date: Feb 2011
Location: Molino, FL
Posts: 73
|
![]() A buddy of mine just bought a 2006 Ezgo TXT and he is wanting more low end power. After reading through Ruredy's sticky about shorter belts it appears that the belt he would need is the 22337-g1?
Just trying to make sure this is correct, I dont want to give him bad info. |
![]() |
![]() |
![]() |
#2 |
Not Yet Wild
Join Date: Jun 2007
Posts: 45
|
![]() I own a 2006 EZGO TXT, and just changed the drive belt this week. The original factory belt for some reason seem loose or stretch. I bought from a web site seller the 3/8" wide x 41" OD #22337-G1. And I will vouch for the better lower end pickup. It really did wonders for the quick start and pickup.
It was a bit difficult to install.. that is till I got smart. I put the belt over the clutch and under the trans. belt housing till I could not get it any farther over the housing. At this point I put the cart is forward gear and started the engine, and when I press the gas pedal the belt flipped right over the trans. hous |
![]() |
![]() |
![]() |
#3 |
Not Yet Wild
![]() Join Date: Feb 2011
Location: Molino, FL
Posts: 73
|
![]() perfect, just making sure I was giving him the correct part number.
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Shorter Drive Belt for 2006 TXT | Gas EZGO | |||
replacing alternator/starter belt with shorter belt | Gas Club Car | |||
92 carry all drive belt and starter belt | Gas Club Car | |||
How do I change the drive belt and altenator belt? | Gas Club Car | |||
'92 carryall with new engine, belt slips even with new belt and motor set far forward | Gas Club Car |