|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
|
Thread Tools | Display Modes |
04-07-2011, 06:20 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2011
Posts: 4
|
Replacing rollers in primary clutch in G-16
Hello,
Have read in several posts that the rollers can be replaced without removing the clutch assembly from the engine. I have a new set of rollers but cannot see how to get them out. Is the spider supposed to slip out of the guides after the main bolt is removed. If so mine is very tight. Any guidance will be much appreciated. |
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Clutch rollers for 97 g16, plastic or steel ? | Gas Yamaha | |||
| PRIMARY CLUTCH ROLLERS-OLD vs NEW | Gas Yamaha | |||
| primary clutch on G2 | Gas Yamaha | |||
| g16 primary clutch | Gas Yamaha | |||
Threaded Mode