Lifting a 2000 ezgo shuttle 6 (electric

[sebarker75]

shawns phone 3-1-15 282.jpg
Just bought this for 3K as is. I want to lift this bigger wheels, tires, and wrap it.

[sebarker75]

[ATTACH]shawns phone 3-1-15 316.jpg[/ATTACH]
I purchased frabic and wrapped the seats, and bought a jakes long travel kit and installed it on the front. it doesn't come with a rear lift.

[sebarker75]

[ATTACH][ATTACH][ATTACH][ATTACH]shawns phone 3-1-15 330.jpg[/ATTACH][/ATTACH][/ATTACH][/ATTACH]
I took the body off and the rear axle and leaf springs

[sebarker75]

[ATTACH][ATTACH][ATTACH]shawns phone 3-1-15 338.jpg[/ATTACH][/ATTACH][/ATTACH]
I measure and cut out cardboard pieces that I would need to make my lift with. I got some pics of this forum too. I took the pieces to a local machine shop and had them plasma cut out.

[sebarker75]

[ATTACH][ATTACH][ATTACH][ATTACH]shawns phone 3-1-15 354.jpg[/ATTACH][/ATTACH][/ATTACH][/ATTACH]
I got one of their welders to come help me put it together. Here are some different angles of this step

[sebarker75]

[ATTACH][ATTACH]shawns phone 3-1-15 361.jpg[/ATTACH][/ATTACH]
Here are some pics of the lift being finished. I was very excited at this point.

[sebarker75]

[ATTACH][ATTACH][ATTACH]shawns phone 3-1-15 373.jpg[/ATTACH][/ATTACH][/ATTACH]
My best friend at Harder Graphics here in longview helped out with the wrap job. We went with flat black. This guy has some great talent to make this stuff bend around all this. Great job chris.

[sebarker75]

shawns phone 3-1-15 376.jpg

shawns phone 3-1-15 377.jpg

shawns phone 3-1-15 378.jpg

shawns phone 3-1-15 379.jpg

shawns phone 3-1-15 380.jpg
We attached the pieces back on and put it all back together.

[sebarker75]

[ATTACH][ATTACH][ATTACH]070.jpg[/ATTACH][/ATTACH][/ATTACH]
We painted the top from white to black and installed it. The kids really love to ride.

[sebarker75]

We are in the process of putting a 500 amp controller, 8 Hp electric motor (D&D Motors)item # 170-004-0001,and a the 400 MZJ selinoid, and upgrading the wire from 4/0 to 2/0. It has been overheating at the F&R switch so I got in contact with scottyb, and he told me to get the reverse contactor installed. We are in the process of getting this all done. I hope it solves my prob. I will have more pics in the future.