|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-25-2016, 08:46 AM | #21 |
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
Re: 2007 TXT PDS no go
Scotty / Johnnie, in post # 7, can this exact diagram be used on a pds cart with a 1264 sepex controller?
I was trying to follow the diagram you posted here, but the pins are different on m controller, mine has one long slot for the small wires. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2016, 09:03 AM | #22 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 2007 TXT PDS no go
How many wires on your main molex connector?
|
03-25-2016, 09:22 AM | #23 |
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
Re: 2007 TXT PDS no go
looks like 24
|
03-25-2016, 09:23 AM | #24 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2007 TXT PDS no go
It would be a lot easier to use a schematic for a 48V PDS-II with a 1264 controller.
|
03-25-2016, 09:25 AM | #25 |
Gone Wild
Join Date: Feb 2012
Location: Indio, CA The Desert!
Posts: 1,263
|
Re: 2007 TXT PDS no go
Awesome, thanks for that drawing. Now with this new drawing you provided, can i use the red troubleshooting "guide" you were using for the other controller here?
|
03-25-2016, 09:39 AM | #26 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2007 TXT PDS no go
Quote:
Other than the pack voltage being different, both the 1264 and the 1206MX have to have the same inputs to function, just the pin numbers are different. |
|
03-31-2016, 04:44 PM | #27 |
Getting Wild
Join Date: Oct 2011
Location: Averill Park NY
Posts: 111
|
Re: 2007 TXT PDS no go
Sorry boys just getting back to this thing. I have full pack voltage at the fuse. Had the ground for the voltmeter on the wrong battery. What should I have for voltage at the selonoid connections? It is not clicking either.
|
03-31-2016, 05:33 PM | #28 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2007 TXT PDS no go
Quote:
Back to square-1, what are the voltage readings on J1 Pins 4&5. (Should be full battery pack voltage) |
|
03-31-2016, 05:44 PM | #29 |
Getting Wild
Join Date: Oct 2011
Location: Averill Park NY
Posts: 111
|
Re: 2007 TXT PDS no go
Freshly charged 40.5 on both
|
03-31-2016, 06:08 PM | #30 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2007 TXT PDS no go
Good.
With Key = ON, F/R = F and pedal pressed, you should have approximately 40.7V on all the pins with a red highlighted wire attached to them on the attached schematic. |
|
|
Similar Threads | ||||
Thread | Forum | |||
2007 PDS Help | Electric EZGO | |||
2007 gas | Gas Yamaha | |||
2007 TXT help | Electric EZGO | |||
2007 ez go pds | Electric EZGO | |||
2007 gas Ez go | Gas EZGO |