![]() |
|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#11 |
Not Yet Wild
![]() Join Date: Aug 2010
Location: Warren Michigan
Posts: 43
|
![]() Quote:
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#12 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 72,527
|
![]() Do I read this right?
Solenoid clicks But the starter does not spin? |
![]() |
![]() |
![]() |
#13 |
Not Yet Wild
![]() Join Date: Sep 2010
Location: NE Indiana
Posts: 9
|
![]() Thanks so much got one ordered for myself lift kit that is. now on another note how do i adjust it to go a lil fater the gov.it gose so slow my 8 year old daughter can walk fater than it help plz were is the adjustment for it ty.
|
![]() |
![]() |
![]() |
#14 |
Gone Wild
![]() Join Date: Aug 2008
Location: Walled Lake MI
Posts: 304
|
![]() FireFighter802
Any chance you could post a closeup picture of your rear roof supports. I have the same style cart (Jacobsen 810) and want to put a roof on it. I have the roof & supports from a standard Marathon so I need to make something up for the rear supports. How does the bottom of the support mount to the cart? I have a hard copy of the operators manual for the Jacobsen but don't know how to get it online |
![]() |
![]() |
![]() |
#15 |
Not Yet Wild
![]() Join Date: Sep 2010
Location: NE Indiana
Posts: 9
|
![]() the suports i found in a buddies barn he said are what it calls for but it's not so i had to mod. it. the front suports the holes line up with the one on the front sides but had to drill one hole on each side there. on the rear suporsts i drilled a hole on the back of the hand rails and used lock nits and it hold just fine. here are two pics whith the spots i drilled..
![]() ![]() has anyone figured out how i can adjust the gov. on my cart plz i still need to figure this out thanks. |
![]() |
![]() |
![]() |
#16 |
Gone Wild
![]() Join Date: Aug 2008
Location: Walled Lake MI
Posts: 304
|
![]() ZIp tie the spring back by the diff. or tighten the nut
Thanks for the roof bracket pict |
![]() |
![]() |
![]() |
#17 |
Not Yet Wild
![]() Join Date: Sep 2010
Location: NE Indiana
Posts: 9
|
![]() Thanks alot i'll give it a shot...got it. ty now next dumb question lol where is the drain plug for the oil... does the skid plate have to come off to get to it?..
|
![]() |
![]() |
![]() |
#18 |
Gone Wild
![]() Join Date: Aug 2008
Location: Walled Lake MI
Posts: 304
|
![]() Its on the right side at the bottom
Best to take the skid plate out of the way so oil doesn't go into it. Only take 3 bolts out of the skid plate. Loosen the 4th bolt & swing the plate out of the way. That way you don't have to hold the plate up to get the bolts started back in |
![]() |
![]() |
![]() |
#19 |
Not Yet Wild
![]() Join Date: Sep 2010
Location: NE Indiana
Posts: 9
|
![]() HELP HELP HELP my cart has been sitting all winter in storage now it will run a lil bit then die but still firing jus tnot goin anywhere like the fuel is shut off and i checked the lines checked the fuel pump it's self all working good it will run like it suposed to in N but then when i put ti in forword or rev. it gose a lil bit then dies like it's outta gas and just sit there and try to start but not fire off and runn what do i look for an were?
plz help |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
ezgo electric golf cart | Electric EZGO | |||
changing seals on ezgo golf cart | Gas EZGO | |||
87 ezgo golf cart | Golf Carts and Parts | |||
my 1st golf cart 1999 EZgo | Gas EZGO |