![]() |
![]() |
#1 |
Gone Wild
![]() Join Date: Apr 2010
Location: West Tennessee
Posts: 1,180
|
![]() Ok my son cleaned the shop the other day and threw away my diagram of my 86 CC 36 volt I am trying to get back going. I have found diagrams up to 85 but no 86. I have the 5 solenoid model and need to know what wire goes where? This is why I like gas carts better! LOL
thanks ![]() ![]() ![]() |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
![]() Join Date: Mar 2009
Location: South Texas
Posts: 2,391
|
![]() So often the older carts have had many changes made by intermixing newer and older model parts. The 1985 had the same wiring used on 1986 when it has the older pedal control with 5 micro switches inside a white-silver box with red ends.
|
![]() |
![]() |
![]() |
#3 |
The Last Moja Morani
![]() ![]() Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
![]() one of those years for some reason had the micro,s mounted under the dash but the wiring should still be the same.......i have a diagram i beleive but i,ll be gone for awhile i,ll pull it out when i get back...............................
![]() |
![]() |
![]() |
![]() |
#4 |
Gone Wild
![]() Join Date: Mar 2009
Location: South Texas
Posts: 2,391
|
![]() SHADOWMAN I think if micros were under dash it would be a Caroche 1975-1980 with 3 pedals?
|
![]() |
![]() |
![]() |
#5 |
The Last Moja Morani
![]() ![]() Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
![]() |
![]() |
![]() |
![]() |
#6 |
Gone Wild
![]() Join Date: Apr 2010
Location: West Tennessee
Posts: 1,180
|
![]() I see a little metal like box in front of the batteries? Maybe thats where they are?
|
![]() |
![]() |
![]() |
#7 |
The Last Moja Morani
![]() ![]() Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
![]() |
![]() |
![]() |
![]() |
#8 |
Gone Wild
![]() Join Date: Apr 2010
Location: West Tennessee
Posts: 1,180
|
![]() Here is what I got, Just need more detailed where the wires hook up on the solenoids at? I drew out the diagram of how it was wired whether or not it was right?? Son threw away when cleaning up shop ( he is grounded ) LOL
|
![]() |
![]() |
![]() |
#9 |
Gone Wild
![]() Join Date: Apr 2010
Location: West Tennessee
Posts: 1,180
|
![]() Ok installed 2 new solenoids and the cart is doing the same thing, 1 click 2 click 3 clicks go!!, Now these 2 solenoids I replaced were broken at the studs, and also replaced the Buss Bar and still same thing.
Is this the box with the micros in it? ![]() If so can they be replaced individually or do you have to buy the whole box? ![]() |
![]() |
![]() |
![]() |
#10 |
The Last Moja Morani
![]() ![]() Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
![]() yes you can open it there are 5 micro,s in there and a plastic slider board............................
![]() |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
1986 ez go electric wiring needed | Electric EZGO | |||
1986 Club Car solenoid wiring diagram | Electric Club Car | |||
1986 Electric CC Wiring Diagram | Electric Club Car | |||
1986 Western Control Wiring | Electric golf carts | |||
1986 Clubcar wiring problem????? | Electric Club Car |