|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-18-2013, 12:28 PM | #1 |
Not Yet Wild
Join Date: Jul 2013
Location: Muncie, Indiana
Posts: 3
|
1994 with a cracked rear engine mount casting
I noticed the muffler was lying against the part of the throttle linkage and got to looking around as to why everything was sort of "sinking in".
Seen a missing bolt out of the back casting and seen on the passenger side of the "rear enging mount casting" was cracked. The drivers side seems to be still intact, so not cracked all the way across. Is this a common problem with these aluminum castings? Anybody know where to get a used one or have one lying around from a big block swap they want to sell or barter with? Thanks, Mike |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-18-2013, 12:35 PM | #2 |
Not Yet Wild
Join Date: Jul 2013
Location: Muncie, Indiana
Posts: 3
|
Re: 1994 with a cracked rear engine mount casting
I'm unable to post links, but you can see a pic of the part in question if you google "Ez-Go rear engine Frame" and click the first Amazon link.
In the service manual its part no. 16 on page N-1 if that helps any. |
07-18-2013, 08:54 PM | #3 |
Gone Wild
Join Date: Jun 2013
Location: Atlanta Ga
Posts: 211
|
Re: 1994 with a cracked rear engine mount casting
i have never seen a broke one been working on them for 10 years
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
G16 rear differential cracked by axle, leaking oil | Gas Yamaha | |||
1985 marathon 2pg engine case cracked | Gas EZGO | |||
engine mount ? | Gas EZGO | |||
Engine Mount | Gas EZGO | |||
g8 engine mount | Gas Yamaha |