|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-19-2013, 10:55 PM
|
#1 |
|
Gone Wild
Join Date: Mar 2012
Location: spokane,wa
Posts: 974
|
79 marathon rear axle bearing
I need some help here guys. I'm trying to replace the rear axle bearings on my 79 marathon with the dana axle. I have the drum, backing plate, keyway and snap ring removed already. I guess my question is do I need a slide hammer to get the axle out? Is there any c-clips inside the diff I have to worry about? Bothe drums catch in one spot and I cleaned and adjusted the brakes thinking that was it but no go. When I press the accelerator pedal it clunks and jerks but won't move. It does it in forward and reverse. Any help would be appreciated.
Sent from my SGH-T999 using Tapatalk 2 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-23-2013, 12:49 PM
|
#2 |
|
Gone Wild
Join Date: Mar 2012
Location: spokane,wa
Posts: 974
|
I got the bearings out. I think my problem is in my drive clutch.
Sent from my SGH-T999 using Tapatalk 2 |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| rear axle bearing replacement | Electric EZGO | |||
| Rear axle bearing part number | Electric EZGO | |||
| Rear Axle Bearing failure | Electric EZGO | |||
| rear axle bearing | Electric EZGO | |||
| Rear Axle Bearing removal | Electric EZGO | |||
Linear Mode
