02-02-2021, 01:35 PM | #41 |
Not Yet Wild
Join Date: Dec 2020
Posts: 41
|
Re: '87 engine removal
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-02-2021, 01:59 PM | #42 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: '87 engine removal
Take the belt off when you spin the wheels, and while it's off squeeze the clutch.
|
02-02-2021, 02:13 PM | #43 | |
Not Yet Wild
Join Date: Dec 2020
Posts: 41
|
Re: '87 engine removal
Quote:
But this front cradle mount does not look as the 2 rear ones. Could that be the issue on why I don’t seem to have enough clearance when removing belt? |
|
02-02-2021, 02:26 PM | #44 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: '87 engine removal
Do you have any movement? My brother's 83 was moving enough that the drive clutch was getting closer to the driven clutch. We could also move the cradle side to side with a bar.
EDIT: I sent you some links to check out. |
02-02-2021, 02:51 PM | #45 |
Not Yet Wild
Join Date: Dec 2020
Posts: 41
|
Re: '87 engine removal
Ok I got belt off. When I squeeze the 2 plates of the driven clutch there is no movement in those plates.
|
02-02-2021, 03:55 PM | #46 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: '87 engine removal
That's good. We can eliminate a worn out clutch. Next up is check cradle mounts, and that rolling resistance you were checking.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 Engine Removal Question | Gas Yamaha | |||
engine clutch removal | Gas EZGO | |||
EZGO engine removal | Gas EZGO | |||
robin 295 engine removal 97 txt | Gas EZGO | |||
engine removal...? | Gas Club Car |