alltrax trouble

bigdave72 · 04-21-2010, 06:36 PM

i have an 88 marathon with an alltrax axe controller that has a high pedal code so i replaced the throttle assembly but still get the same code. has anybody ever ran into this before.

scottyb · 04-21-2010, 09:35 PM

NO but...... since nobody else chimed in

try this: Get a 5 ft wire with alligator clips on it. Connect one end to battery positive 36v or 48v ( whatever the case) and connect the other end to the #1 terminal (power up / red wire? ) on the controller and test the cart

bigdave72 · 04-27-2010, 05:09 AM

tried checking the controller on my computer to see if somthing has gone wrong there and disabled the high pedal . now it runs wide open as soon as you touch the accelerator.

SpoiledRotten · 04-27-2010, 07:31 AM

Let you mother n law drive it on some tight trails before you fix that problem. Better yet, let mine drive it.

scottyb · 04-27-2010, 08:53 AM

Dave, it sounds like the throttle output does not match the controller's input ..... typically the input is either 5k-0 or 0-5k on the throttle unit and the controller ~ Either way, they must be matched up. It sounds like yours is not. Hope this helps

04-21-2010, 06:36 PM	#1
bigdave72 Not Yet Wild Join Date: Mar 2009 Posts: 9	alltrax trouble i have an 88 marathon with an alltrax axe controller that has a high pedal code so i replaced the throttle assembly but still get the same code. has anybody ever ran into this before.
bigdave72 Not Yet Wild Join Date: Mar 2009 Posts: 9

04-21-2010, 09:35 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: alltrax trouble NO but...... since nobody else chimed in try this: Get a 5 ft wire with alligator clips on it. Connect one end to battery positive 36v or 48v ( whatever the case) and connect the other end to the #1 terminal (power up / red wire? ) on the controller and test the cart

04-27-2010, 05:09 AM	#3
bigdave72 Not Yet Wild Join Date: Mar 2009 Posts: 9	Re: alltrax trouble tried checking the controller on my computer to see if somthing has gone wrong there and disabled the high pedal . now it runs wide open as soon as you touch the accelerator.
bigdave72 Not Yet Wild Join Date: Mar 2009 Posts: 9

04-27-2010, 07:31 AM	#4
SpoiledRotten Conservatively Wild Join Date: Aug 2009 Location: Below the Mason Dixon Posts: 3,610	Re: alltrax trouble Let you mother n law drive it on some tight trails before you fix that problem. Better yet, let mine drive it.

04-27-2010, 08:53 AM	#5
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,406	Re: alltrax trouble Dave, it sounds like the throttle output does not match the controller's input ..... typically the input is either 5k-0 or 0-5k on the throttle unit and the controller ~ Either way, they must be matched up. It sounds like yours is not. Hope this helps

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Still Having Trouble	Electric EZGO
ez go trouble	Electric EZGO
PDS trouble	Electric EZGO
G1 POS trouble	Gas Yamaha
Alltrax trouble..........	Extreme DC!