|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
08-07-2016, 01:19 PM | #1 |
Not Yet Wild
Join Date: Aug 2016
Location: Iowa
Posts: 3
|
1985 36v forward reverse switch wiring and motor terminal identification
The Forward reverse switch on my 1985 Club car broke, shorted and actually caught fire. I ordered a new switch from here and downloaded the schematic (thank you). Had to replace several wires and now it does not work.
First question, every diagram I see shows the motor terminals in a straight line, mine are more side by side, motor model 1012190 (maybe this was not original motor?), the markings on the motor are gone, how do I identify which terminal each wire go to, on the motor 2nd question, how do I do the same one the F/R switch? 3rd question, am I supposed to jumper the bottom of the F/R switch? I have seen that in several posts on the internet Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
Tags |
36 volt, club car, terminal identification, wiring |
|
|
Similar Threads | ||||
Thread | Forum | |||
Forward Reverse switch wiring on DS | Electric Club Car | |||
Forward Reverse switch wiring. | Electric Club Car | |||
wiring new forward reverse switch | Electric Club Car | |||
forward reverse switch wiring | Electric Club Car | |||
forward/reverse switch wiring | Electric Club Car |