|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-19-2014, 11:05 AM | #11 |
Gone Wild
Join Date: Aug 2012
Location: Monroe, Wisconsin
Posts: 516
|
How do you keep the clutch from spinning
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-19-2014, 12:13 PM | #12 |
Call me Rich
Join Date: Mar 2011
Location: Western NY
Posts: 1,156
|
Re: Need help. I cant find any way to get my clutch off...
You should be able to hold it with 1 hand while the other is working the impact gun.
|
03-19-2014, 01:09 PM | #13 |
Not Yet Wild
Join Date: Mar 2014
Posts: 3
|
Re: Need help. I cant find any way to get my clutch off...
Is there any way to remove the clutch without removing the engine? I ca loosen the clutch bolt, but the frame gets in the way of removing the bolt completely. I just need to slide the clutch and pulleys a bit out of the way so I can set the cam timing.
|
03-19-2014, 01:16 PM | #14 |
Gone Wild
Join Date: Nov 2013
Location: Aylett, Va. on the Mattaponi.
Posts: 1,530
|
Re: Need help. I cant find any way to get my clutch off...
I had to drop my engine cradle down just an inch or so to get the bolt out.
|
03-19-2014, 03:53 PM | #15 |
Getting Wild
Join Date: Oct 2013
Location: Salley, SC
Posts: 131
|
Re: Need help. I cant find any way to get my clutch off...
Put a jack under the frame and jack it up on the driver side, please use jack stands as well to support it. This should give you some room to work with.
|
03-19-2014, 04:55 PM | #16 |
Not Yet Wild
Join Date: Mar 2014
Posts: 3
|
Re: Need help. I cant find any way to get my clutch off...
Thank y'all.
|
03-19-2014, 09:31 PM | #17 |
Gone Wild
Join Date: Aug 2012
Location: Monroe, Wisconsin
Posts: 516
|
Here is a picture of where I am so far. I just got an impact and will be trying that tomorrow after work
|
03-19-2014, 09:49 PM | #18 |
Gone Wild
Join Date: Oct 2013
Posts: 690
|
Re: Need help. I cant find any way to get my clutch off...
I don't have that clutch, so I'm not familiar with the look of that. What is the black sleeve that clutch remover is inside of? That doesn't look right.
|
03-20-2014, 04:30 AM | #19 |
Gone Wild
Join Date: Aug 2012
Location: Monroe, Wisconsin
Posts: 516
|
Its where the old bolt was that held the other half on. I just took it somewhat apart to see if anything was wrong with it and there was
|
03-20-2014, 08:46 AM | #20 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: Need help. I cant find any way to get my clutch off...
That's not right !!!! All you would need is a piece of rod that fits in the hole with the bolt removed I think maybe 1/2 X 3" long then a bolt the same size and thread as the clutch about 2" long. I think it's 3/4 fine thread or maybe 5/8" depending on the clutch then crank down the bolt and pop it's off
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
where to find a high torque clutch? | Gas EZGO | |||
My $1,000 find | Members Rides | |||
Cant find it Now. | Gas Yamaha | |||
Trying to find out what my EZ-GO is | Gas EZGO | |||
wher can i find a comet 780 clutch? | Big Block Talk! |