Poor running

Mateo82 · 05-25-2020, 07:43 PM

I have a yamaha g14 36 volt. I have converted it to 48volt. I have an alltrax controller, an electronic contactor for the f and r, 3 month old batteries, 2 gauge cables for every high current connection, stock 36volt motor with new brushes. It was working great for 3 months until this weekend it would barely pull 3 people and I dropped down to 47.2 volts. I load tested all he batts and none of them dropped below 8.1. All my connections are good and tight and no corrosion. Where do I start looking next? Thanks!

Sent from my SM-N970U using Tapatalk

05-25-2020, 07:43 PM	#1
Mateo82 Not Yet Wild Join Date: Dec 2018 Posts: 16	Poor running I have a yamaha g14 36 volt. I have converted it to 48volt. I have an alltrax controller, an electronic contactor for the f and r, 3 month old batteries, 2 gauge cables for every high current connection, stock 36volt motor with new brushes. It was working great for 3 months until this weekend it would barely pull 3 people and I dropped down to 47.2 volts. I load tested all he batts and none of them dropped below 8.1. All my connections are good and tight and no corrosion. Where do I start looking next? Thanks! Sent from my SM-N970U using Tapatalk
Mateo82 Not Yet Wild Join Date: Dec 2018 Posts: 16

Similar Threads
Thread	Forum
Poor running 93' gas Yamaha cart	Gas Yamaha
90 Marathon running poor after rebuild	Gas EZGO
poor running precedent	Gas Club Car
poor running 98 ezgo	Gas EZGO
G9 With poor running engine	Gas Yamaha