81 g1

makobuggie · 03-03-2014, 10:49 PM

Hello, im changeing the front knuckle on my cart and the bushing, i tried to get the nut off the wheel hub and it rounded the nut head, so im buying a new knuckle, and the bushing on the tie rod is real rusted, and the other end knuckle is like real lose feeling should it be like this? Or should i replace it? And im looking for a 81 g1 diagram? I cant find any, im getting stumped on this, and im disabled , can someone give me some hints? Thanks

smokindawg · 03-04-2014, 10:03 AM

Not sure what your talking about when you say knuckle. When it comes too front end parts, if they are loose I'd look at replacing them all.

With these carts being so old there is a lot can be updated and made to work better.

I actually have Hiem joints and related parts that I'm going to use to make my own complete new tie rods. I know that my tie rods have some play in them and I hope that doing this will help with my bump steer.

So I'd say if you have any doubt and no one close to take a look, replace the loose parts.

DOOmsman · 03-04-2014, 10:14 AM

http://yamahagolfcar.com/partsandservice/default.aspx#

03-03-2014, 10:49 PM	#1
makobuggie Gone Wild Join Date: Jul 2011 Posts: 389	81 g1 Hello, im changeing the front knuckle on my cart and the bushing, i tried to get the nut off the wheel hub and it rounded the nut head, so im buying a new knuckle, and the bushing on the tie rod is real rusted, and the other end knuckle is like real lose feeling should it be like this? Or should i replace it? And im looking for a 81 g1 diagram? I cant find any, im getting stumped on this, and im disabled , can someone give me some hints? Thanks
makobuggie Gone Wild Join Date: Jul 2011 Posts: 389

03-04-2014, 10:03 AM	#2
smokindawg Gone Wild Join Date: Sep 2012 Location: Missouri Posts: 2,755	Re: 81 g1 Not sure what your talking about when you say knuckle. When it comes too front end parts, if they are loose I'd look at replacing them all. With these carts being so old there is a lot can be updated and made to work better. I actually have Hiem joints and related parts that I'm going to use to make my own complete new tie rods. I know that my tie rods have some play in them and I hope that doing this will help with my bump steer. So I'd say if you have any doubt and no one close to take a look, replace the loose parts.

03-04-2014, 10:14 AM	#3
DOOmsman Gone Wild Join Date: Jul 2008 Location: Reddick IL Posts: 11,220	Re: 81 g1 http://yamahagolfcar.com/partsandservice/default.aspx#

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum