|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-08-2011, 03:51 PM | #1 |
Not Yet Wild
Join Date: Apr 2009
Posts: 10
|
Non-PDS won't go in Reverse
I have a non-PDS '2001' that works fine in forward but does nothing in reverse. The reverse buzzer sounds but I doesn't move when I depress the peddle. Is it possible that the big manual Forward/Reverse selector could have a problem only in reverse? Is there an easy way to trouble shoot this?
I looked at the wiring diagram and also the physical switch. Nothing seems out of the ordinary with the switch and the wiring diagram doesn't make it clear that the switch could be the failure point, but I don't know what else it could be. If no one has any suggestions, I guess I need to start tearing it apart and checking things with a meter. Thanks, Steve |
Tags |
reverse problem |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
wiring a reverse light to the reverse buzzer? | Gas Yamaha | |||
Foward in reverse and reverse in forward | Electric Club Car | |||
Reverse alarm sounds in Forward, wont go forward or reverse | Electric Club Car | |||
Reverse alarm stuck - motor won't run forward or reverse | Electric EZGO | |||
No Reverse | Electric Club Car |