|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
01-08-2018, 09:53 PM | #1 |
Not Yet Wild
Join Date: Jan 2018
Posts: 6
|
Need flywheel for kawasaki fe290d
I am having a hard time finding a flywheel for my 93 ds with the fe290d motor. Mine has one broken fin. I thought about trying JB weld to repair but would prefer a new or used one.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-09-2018, 08:45 AM | #2 |
Gone Wild
Join Date: Dec 2017
Location: Portsmouth, VA
Posts: 626
|
Re: Need flywheel for kawasaki fe290d
make sure you get the correct rotation, CW or CCW
what is the Club Car or Kawasaki Part No ?? |
01-09-2018, 06:59 PM | #3 |
Not Yet Wild
Join Date: Jan 2018
Posts: 6
|
Re: Need flywheel for kawasaki fe290d
I believe the Kawasaki part number is 21194-2254 and the rotation is CW. The entire engine model number is FE290D-DS05. The flywheel is cast iron if that matters.
|
01-09-2018, 07:34 PM | #4 |
Not Yet Wild
Join Date: Jan 2018
Posts: 6
|
Re: Need flywheel for kawasaki fe290d
I guess it depends on which side of the motor you look at. Looking at the flywheel it looks like it rotates CW but the cart is a 93 so it must be CCW looking at the drive clutch?
|
01-09-2018, 08:49 PM | #5 |
Gone Wild
Join Date: Dec 2017
Location: Portsmouth, VA
Posts: 626
|
Re: Need flywheel for kawasaki fe290d
from other post on here:
1992: Started with the FE290 (290cc) Overhead valve, 4-cycle, gas engine in golf cars. Engine rotation is counterclockwise when viewed from the clutch side of engine guess it has separate trans & Diff, then in 1997 Started with the Unitized Powertrain (transmission & differential are combined as one unit) and changed the rotation of the FE290 & FE351 engines. Engine rotation is clockwise when viewed from the clutch side. |
01-09-2018, 10:05 PM | #6 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,931
|
Re: Need flywheel for kawasaki fe290d
A 1993 should have a counter clockwise rotation (viewed from the drive clutch) if it's the original engine,
the Club Car Part number for the flywheel is 1016495! |
01-09-2018, 11:37 PM | #7 |
Addictive Personality
Join Date: Jun 2017
Location: Rio Linda, Ca.
Posts: 1,289
|
Re: Need flywheel for kawasaki fe290d
I have the stock engine I pulled out of the 89 CC. If it has the same flywheel you need let me know.
|
01-10-2018, 07:15 AM | #8 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,931
|
Re: Need flywheel for kawasaki fe290d
Your 89 KF82, and his 93 FE290 are two completely different animals!
Really nice thought though! |
01-10-2018, 11:18 AM | #9 |
Not Yet Wild
Join Date: Oct 2017
Posts: 11
|
Re: Need flywheel for kawasaki fe290d
Don't jb weld, if anything break the opposite fin off to balance the flywheel, okay that's the in a pinch backwoods fix,,,
Sent from my XT1609 using Tapatalk |
01-10-2018, 10:30 PM | #10 |
Not Yet Wild
Join Date: Jan 2018
Posts: 6
|
Re: Need flywheel for kawasaki fe290d
I found the flywheel new using the part number but $380.00 is a litlle much. Surely there are some used ones somewhere. I live in AZ and you would think there would be parts all over but these older carts are like ghost.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Kawasaki FE290D - Head Gasket Leak | Gas Club Car | |||
Fe290d | Gas Club Car | |||
Sleeving FE290D | Gas Club Car | |||
Concerned about Kawasaki FE290d-CS17 | Gas Club Car | |||
So I have a KAWASAKI FE290D, in my 87 cart. | Gas Club Car |