lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-09-2009, 08:20 PM   #1
eebasist
Not Yet Wild
 
Join Date: Jun 2008
Posts: 57
Default What size thread for Primary Puller Bolt?

Well I'm not about to pay 45 dollars for a primary clutch puller bolt (nor do I want to wait that long).

The Polaris boys have been putting a spacer down the hole then a bolt that fits the top thread and popping theirs off. Same concept would work with ours....except I don't know the thread size on the top of the clutch

Does anyone know the thread size and pitch?

Here's a link to similar items used for Polaris clutches.
http://imageevent.com/cobs/clutchtoo...eo7r37.zebra_s

Thanks
eebasist is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Clutch bolt size 83 EZGO gas cart Gas EZGO
Homemade Puller Design Center
Clutch Bolt Thread Specs Gas Yamaha
96 DS stock drive clutch bolt size (exterior bolt) Gas Club Car
Cutch Puller Big Block Talk!


All times are GMT -5. The time now is 11:40 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.