lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-22-2020, 11:00 AM   #1
Bertrrr
Getting Wild
E-Z-GO
 
Join Date: May 2017
Location: South Louisiana
Posts: 90
Default 36 volt txt control circuit help

I have a new controller ( Curtis 1206 ) my cart is a series drive as near I can tell, speed control is ITS pedal switch under the floor board etc.
I am either too dumb to follow a diagram or do not have the correct one to look at, probably the former .
At any rate, I can get the solenoid to click if I apply 36 volts to it , what I need is some guidance on the control circuit wiring .
36 volts to the key switch , then pedal switch , then forward reverse micro switches then back to solenoid ?
Any input would be great, thanks in advance,
Bertrrr is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 06-22-2020, 02:06 PM   #2
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: 36 volt txt control circuit help

Here's a schematic for a series drive with solenoid activation circuit highlighted.
Attached Images
File Type: jpg Wiring Diagram - Series with KSI traced.JPG (58.9 KB, 0 views)
JohnnieB is offline   Reply With Quote
Old 07-13-2020, 09:13 AM   #3
Golfcartmangreen
Not Yet Wild
E-Z-GO
 
Join Date: Dec 2015
Location: greenwood sc
Posts: 22
Default Re: 36 volt txt control circuit help

anyone have a solenoid activation circuit diagram on a 200 pds, it has a dcs f&r and a pds controller
Golfcartmangreen is offline   Reply With Quote
Old 07-13-2020, 09:14 AM   #4
Golfcartmangreen
Not Yet Wild
E-Z-GO
 
Join Date: Dec 2015
Location: greenwood sc
Posts: 22
Default Re: 36 volt txt control circuit help

sorry that should be 2000 PDS
Golfcartmangreen is offline   Reply With Quote
Old 07-13-2020, 01:40 PM   #5
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: 36 volt txt control circuit help

Quote:
Originally Posted by Golfcartmangreen View Post
anyone have a solenoid activation circuit diagram on a 200 pds, it has a dcs f&r and a pds controller
Your cart has an early 2000 type PDS F/R switch rather than a DCS type.
The cam on the DCS type closes the driver side switch in both F and R, while the PDS type only closes it in F.

In their infinite wisdom, EZGO designed a $100 mechanical equivalency of a $5 SPST toggle switch.
Attached Images
File Type: jpg Wiring Diagram - PDS - Solenoid activation traced.jpg (69.7 KB, 0 views)
File Type: jpg Early 2000 PDS F-N-R switch.jpg (93.2 KB, 0 views)
JohnnieB is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO




Similar Threads
Thread Forum
97 CC DS Upgrade - Confusion about Control Circuit Electric Club Car
24 volt 300 amp control (wanted) Golf Carts and Parts
48 volt circuit breaker ? Design Center
'02 48 volt throttle control sensor? Electric Yamaha
Basic Series Wiring Schematic with control circuit Electric EZGO


All times are GMT -5. The time now is 03:14 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.