'92 DS 36v Resistor to AC Conversion

[lcbsc]

Ok. Time to take the plunge...I think I almost have enough saved up for the conversion. Just need help to make sure I order everything I need. Converting stock 36V resistor cart to Navitas AC 600A/5kw system. I think this is what I need.(going lithium at same time btw)...

Navitas AC conversion kit
Pre MCOR to MCOR conversion kit
FNR switch
Precedent IQ wiring harness
(?) New pedal like the PB6?
2 pin plug kit
3 pin plug kit
2G or 4G batt cables
Do I need a new Solenoid?

Am I missing anything? Thanks as always!

[Jake_Daddy]

Can’t help you to much but interested in how this one turns out. I don’t think you need a new pedal or PB6 (I assume your talking the Curtis pot box) if your doing an MCOR conversion.

[lcbsc]

Originally Posted by Jake_Daddy

Can’t help you to much but interested in how this one turns out. I don’t think you need a new pedal or PB6 (I assume your talking the Curtis pot box) if your doing an MCOR conversion.

Ok. That's what I was wondering hence the question Mark's. Thanks for the input.

[Jake_Daddy]

I am sure that new solenoid and cables will be in order too. For a 600A I imagine you will be looking at a minimum of 2ga cable and a solenoid minimum at 400A, this will vary based on what Navitas recommends but your not gonna get away with stock components.