|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
01-07-2010, 08:41 PM | #1 |
Not Yet Wild
Join Date: Aug 2009
Location: phoenix area
Posts: 59
|
loose clutch belt/sheeve stuck or replace???
golfcartpaintings 006.jpg
golfcartpaintings 008.jpg golfcartpaintings 009.jpg golfcartpaintings 010.jpg[/ATTACH]hey all i have a G9 and the sheeve is stuck, like if you have it on full throttle, don't know if i need to replace it or if its just stuck?? also the clutch belt is loose very loose, i noticed the motor mounts are bad, 3 of them dont know if that i what has caused all of this stuff to fail?!?! Any help would be appreciated. thanks matt |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-08-2010, 10:08 AM | #2 |
Admin
Join Date: Dec 2006
Location: TN
Posts: 101,868
|
Re: loose clutch belt/sheeve stuck or replace???
Matt, more than likely the bushing in the inner sheave is damaged and seized on the shaft due to no grease. Pull the rear clutch system and check the bushing on the inner sheave. If it appears to be ok, thoroughly clean it with some carb cleaner or something and then hand grease it really good. I'd also shoot a couple of pumps of grease through the zirk to make sure it is free. Check your drive shaft for any kinks, scores, or gashes. As long as you can't really feel anything on the shaft, it should be ok. If it is scored or gashed, you can sand down the burs or whatever to true it up a bit. Depending on the shape of the bushing and sheave, you may have to replace the inner sheave. Hopefully it will be ok.
If your cart is lifted, now would be a good time get a spring/spacer torque kit for about $45 and install it. I would at least get the spacer and replace the c-clip on the shaft. |
|
|
01-08-2010, 12:43 PM | #3 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: loose clutch belt/sheeve stuck or replace???
Looks like the spring may be broken.
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
01-08-2010, 08:30 PM | #4 |
Not Yet Wild
Join Date: Aug 2009
Location: phoenix area
Posts: 59
|
Re: loose clutch belt/sheeve stuck or replace???
the funny thing is we put grease in the zurks put the new belt on, thats when we discoverd it wasnt running right, i will take your advise and let my buddy know, will be hopefully reparing this weekend fingers crossed, once i get it apart hopefully all know more, whats the whole torque kit for, the cart is lifted. thanks spriddle
|
01-08-2010, 08:34 PM | #5 |
Not Yet Wild
Join Date: Aug 2009
Location: phoenix area
Posts: 59
|
Re: loose clutch belt/sheeve stuck or replace???
didnt notice any cracks or breaks in the spring, but wasnt looking at it that closely, all check that to. thanks new guy
|
01-08-2010, 10:10 PM | #6 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: loose clutch belt/sheeve stuck or replace???
crispy, I'm in central Phx. I don't know what sprid or new guy knows but, I know a little. I just rebuilt my G8 form the frame-up. (if I can help)
mmcconville03@cox.net |
01-10-2010, 12:32 PM | #7 | |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: loose clutch belt/sheeve stuck or replace???
Quote:
Nice offer Mike! |
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
||
01-10-2010, 12:48 PM | #8 |
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: loose clutch belt/sheeve stuck or replace???
Ya, and I bet you guys get tired of all the dumb questions we ask, huh?
Serious; tho. Thanks for all you old timers do! I really enjoy working or piddling on this thing, but now theres nothing left to do. |
01-10-2010, 01:00 PM | #9 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: loose clutch belt/sheeve stuck or replace???
|
01-11-2010, 11:34 AM | #10 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: loose clutch belt/sheeve stuck or replace???
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Drive Clutch stuck | Gas EZGO | |||
belt is loose | Gas Yamaha | |||
Drive Clutch coming loose | Gas EZGO | |||
is it time to replace the starter belt? | Gas Club Car | |||
Replace clutch 2002 gas txt | Gas EZGO |