bad axle bolts

[optikid]

On my 1998 cc on my back axle the bolts that hold the tires on are stripped, so is there any way I can replace just the bolts? Thanks

[scottyb]

Yes you are looking for a wheel stud, (1/2x20 thread) all the CC are the same for DS carts. Try one of the site sponsors. (not me )

[optikid]

how would you change it?

[gsf35099]

Once you pull the hub off, you should be able to knock the stud out the back of the axle and then put the new ones in.

[optikid]

do you know what the part number is? i cant find them

[Stevegrmich]

Originally Posted by optikid

do you know what the part number is? i cant find them

. . . part #103477901 Lug Stud, 1/2-20 Unf, 4037

. . .

[optikid]

http://shop.advanceautoparts.com/web...+stud+1%2F2+20 will this work?

[93yellowclubcar]

Originally Posted by optikid

http://shop.advanceautoparts.com/web...+stud+1%2F2+20 will this work?

This looks like it would work, but the best way to be sure is to jack up the cart, take off the wheel where the bad lug studs are, and drive one of the bad ones out backwards (just hit it on the end with a hammer til it comes out) Then take it with you to the auto parts store and choose the one that is the correct size, or order an exact replacement online.

On putting the new ones in: Reverse of removal, but when you get it through the hole it wont seat obviously because it needs to be pressed in. This is done easily by putting a few washers stacked together over the stud sticking out toward you and then tightening the lug nut down so that the stud is seated into the end of the axle.