|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
|
Thread Tools | Display Modes |
04-02-2017, 11:22 AM
|
#1 |
|
Getting Wild
Join Date: Apr 2010
Location: Aiken South Carolina
Posts: 105
|
Voltage and Current on XCT Controller
Still having problems with new motor and controller. Xct 500 amp for DCS 36 to 48 volt upgrade hooked up the software with laptop. Software is showing no current and 2.1 volts when pedal depressed. Also has a warning down where it shows rpm and will not let me change it, It is showing 1000 rpms. This may be the problem but wont let me change it. Any help would be appreciated. Thanks
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| key switch voltage and current | Electric EZGO | |||
| Electric motor voltage/current questions | Electric EZGO | |||
| RXV High Current Controller | Electric EZGO | |||
| 2008 TXT with PDS draws current with controller in ".tow" | Electric EZGO | |||
| voltage across the controller | Electric EZGO | |||
Threaded Mode