|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-24-2008, 07:48 PM
|
#1 |
|
Not Yet Wild
Join Date: Jun 2008
Location: Baytown, Texas
Posts: 9
|
how to get both wheels spinning
is there an easy way to get power to both wheels on an 04 ezgo?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-24-2008, 08:43 PM
|
#2 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: how to get both wheels spinning
how to get both wheels spinning?
I wish I could get one wheel to spin.. : ) |
|
|
|
|
06-24-2008, 09:14 PM
|
#3 |
|
Not Yet Wild
Join Date: Jun 2008
Location: where all kings are...on the thrown
Posts: 22
|
Re: how to get both wheels spinning
i welded my spider gears together in the rear end so i have full rear diff. they both spin all the time. that is the easiest way
|
|
|
|
|
06-25-2008, 07:18 AM
|
#4 |
|
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: how to get both wheels spinning
There is a limited slip kit for the rear ends, it won't do as well as a locker or welding up the gears but it is an improvment over the open rear.
|
|
|
|
|
06-25-2008, 09:44 AM
|
#5 |
|
Not Yet Wild
Join Date: Jun 2008
Location: Baytown, Texas
Posts: 9
|
Re: how to get both wheels spinning
I thought about welding it but I just don't want to mess up that rear end.
|
|
|
|
|
06-25-2008, 04:31 PM
|
#6 |
|
Not Yet Wild
Join Date: Mar 2008
Location: Maui Hawaii
Posts: 21
|
Re: how to get both wheels spinning
One draw back to a welded diff or spool is trying to make tight turns....its more for going straight. Personally I've seen a lot of broken axles because people try to use it on the street.
|
|
|
|
|
06-25-2008, 06:20 PM
|
#7 |
|
Not Yet Wild
Join Date: Jun 2008
Location: where all kings are...on the thrown
Posts: 22
|
Re: how to get both wheels spinning
i will definitly agree if you go welded do drive on pavement only off road.
|
|
|
|
|
06-26-2008, 05:16 PM
|
#8 |
|
Getting Wild
Join Date: May 2008
Posts: 126
|
Re: how to get both wheels spinning
The only LSD kits available are for the 98 ups. Seems there was a bearing change that year. So 97 down has no kit. Just so you know.
|
|
|
|
|
07-01-2008, 11:53 AM
|
#9 |
|
Gone Wild
Join Date: May 2008
Location: imlay city, michigan
Posts: 363
|
Re: how to get both wheels spinning
i have my spiders welded on my club car. they have been welded for 2 to 3 years, it goes anywhere. never had any problems. do 90% off road riding.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| wheels wanted | Golf Carts and Parts | |||
| Wheels & Tires | Electric Club Car | |||
| wheels, 4x100 = 4 on 4 | Lifted Golf Carts | |||
| WTB--Honda Wheels | Autos/Side x Sides/ATVs/4x4's | |||
| WTB: 10 or 12 inch 4 on 4 wheels | Golf Carts and Parts | |||
Linear Mode
