|
Big Block Talk! Everything about swapping a big block engine into your cart! |
|
Thread Tools | Display Modes |
04-10-2009, 08:16 PM | #1 |
Not Yet Wild
Join Date: Jan 2009
Posts: 35
|
honda gx620 oil level circuit
hello, i put this engine into a 99 club car.
the way i wired it so the current goes from the black blue wire, threw the oil level light, then to the ground. the engine is grounded seprately with a ground strap. it lights up when the engine is running but i put a mechanical oil pressure guage and it reads above 30 like it should. i want to wire it so that if oil pressure fails, it will shut the engine off completely. also it seems that when i shut the engine off, with the key, instead of killing the engine, it cuts the coil off then runs out of power, the reason i say this is it takes maybe 2 seconds to shut off. thanks josh |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
honda gx620 installed into a '99 carryall 1 | Big Block Talk! | |||
honda gx620 engine mounting plate | Big Block Talk! | |||
What float level for flat head? | Gas Club Car | |||
Rear Dif. Fill Level | Electric EZGO |