|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
12-22-2020, 06:13 PM
|
#11 |
|
Not Yet Wild
Join Date: Nov 2015
Location: South Carolina
Posts: 8
|
Re: EZGo workhorse 1200 LX
Got wires back together and new seleniod. Cart fired off. Now having intermittent firing issues. Will test out coil and plugs when the sun rises.
Thanks for all the help! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-22-2020, 09:56 PM
|
#12 |
|
Not Yet Wild
Join Date: Nov 2015
Location: South Carolina
Posts: 8
|
Re: EZGo workhorse 1200 LX
wires back together and new seleniod. Cart starts but now intermittent firing issues. Sometimes it fires sometimes it don't. Any ideas?
|
|
|
|
|
12-23-2020, 05:40 AM
|
#13 |
|
British born Nincompoop
 Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: EZGo workhorse 1200 LX
Check the ignition coil connector for good contact. That is often the problem with intermittent firing. if suspect, cut off and use spade or bullet terminals instead.
|
|
|
|
|
12-23-2020, 12:24 PM
|
#14 |
|
Not Yet Wild
Join Date: Nov 2015
Location: South Carolina
Posts: 8
|
Re: EZGo workhorse 1200 LX
Ok thanks everyone for the help. Made sure the lugs on coil were tight and she fired up. So synopsis of whole ordeal, wire came unplugged from reverse/forward switch once i found the proper lug, i got power back to key switch once pedal was pressed to start engine but no power on starter wire. Replaced seleniod and tightened up all connections, cart nows runs. Next project to the workhorse is stopping oil leaks. It appears to be chrankshaft seal and valve cover. Will also adjust valves. Any help on those projects please feel free to PM me or lead me to the resorces.
|
|
|
|
|
03-16-2021, 03:20 PM
|
#15 |
|
Not Yet Wild
Join Date: Nov 2015
Location: South Carolina
Posts: 8
|
Re: EZGo workhorse 1200 LX
I am having issues with this cart not running to its full potential since I found the wire and got it reattached. It runs like its skipping or not getting full power. Compression checks 180 on both cylinders. Anyone know what to do next? Plugs? Wires?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2000 ezgo workhorse 1200 | Electric EZGO | |||
| ISO EZGO Workhorse MPT 1200 clutch | Golf Carts and Parts | |||
| EZGO 1200 Workhorse will not run | Gas EZGO | |||
| 2000 Ezgo Workhorse 1200 | Golf Carts and Parts | |||
| 1997 EZGO Workhorse 1200 | Gas EZGO | |||
Linear Mode
