12-30-2020, 05:53 PM | #1 |
Not Yet Wild
Join Date: Dec 2020
Location: Dayton, Ohio
Posts: 6
|
GTW Assembly wiring
I have the Mad Jax Ultimate lights on my 2016 Txt, I just installed the GTW Upgrade kit. I am needing to know to run the daytime running lights with my turnsignal assembley which wire do i use to hook up with red/white stripe wire on the lights themself? Thanks in advance.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-31-2020, 06:25 PM | #2 |
Not Yet Wild
Join Date: Dec 2020
Location: Dayton, Ohio
Posts: 6
|
Re: GTW Assembly wiring
UPDATE: After many hours of searching the Net, I came up with the red wire with the white stripe bullet end coming out of the head lights themselves, needs connected to a 12 volt +. I have a Gtw turn signal assembly and there is a position on that lever for daytime running lights, Im trying to find a schematic for that turn signal assembly to find out which wire to use. Any help would be great.
|
01-01-2021, 05:23 PM | #3 |
Not Yet Wild
Join Date: Dec 2020
Location: Dayton, Ohio
Posts: 6
|
Re: GTW Assembly wiring
Update: I figured it out. Daytime running light are now wired and working as they should!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G2 wiring harness assembly help!!! | Gas Yamaha | |||
WTB: g2 air box assembly | Golf Carts and Parts | |||
tie rod assembly | Electric EZGO | |||
tie rod assembly | Electric EZGO | |||
wtb f/r assembly for cc | Golf Carts and Parts |