strange noise coming from curtis

DIT Mobile · 04-12-2011, 05:03 PM

ty gleemo, just got another 2 controllers, can hear both solenoids clicking now but still no movement.

with pedal up, theres 48V at the A1 armature terminal, when pedal closes, the whole power system drops to 0V.

also tried to feed directly 48V onto the armature from the mains in, can hear the motor emitting a frequency, but no movement. white cable from A2 to controller and dynamic braking solenoid white cable starts to heat up a lot :/

possible short in the stator or is the OBC messing me up?

shadowman · 04-12-2011, 05:57 PM

ifyou can jump the soleniod and cart runs i don,t think its an OBC do you happen to have another soleniod to slap in and try? .................

DIT Mobile · 04-12-2011, 06:26 PM

got a new solenoid and controller, same problem. solenoids click fine just no movement.

batteries are good, signal is good, im lost :S

GLEEMO · 04-12-2011, 07:26 PM

I can't imagin what the %^& would be going on with the motor ,
pop it off look for obvious heat issues, try spinning it , it could be obvious !

If U need i can dig up (I think) the old bench test diagram for the motor.
let me know after U check it .

DIT Mobile · 04-12-2011, 07:44 PM

checked the motor ages ago, bench test, cleaned the rotor n stator, growler test, and all fine.

im completely lost atm :p

shadowman · 04-13-2011, 07:33 AM

does cart have v-glide or pot?..............................

DIT Mobile · 04-13-2011, 08:29 AM

its originally a v glide type but have been using both the pot and v glide.

and i know both of these devises are working 100% :P

GLEEMO · 04-13-2011, 12:10 PM

Quote:

Originally Posted by DIT Mobile

its originally a v glide type but have been using both the pot and v glide.

and i know both of these devises are working 100% :P

splain this , which on are U using now .

Do U have the manual for this cart ?

04-12-2011, 05:03 PM	#11
DIT Mobile Not Yet Wild Join Date: Feb 2011 Location: dublin ^.^ Posts: 35	Re: strange noise coming from curtis ty gleemo, just got another 2 controllers, can hear both solenoids clicking now but still no movement. with pedal up, theres 48V at the A1 armature terminal, when pedal closes, the whole power system drops to 0V. also tried to feed directly 48V onto the armature from the mains in, can hear the motor emitting a frequency, but no movement. white cable from A2 to controller and dynamic braking solenoid white cable starts to heat up a lot :/ possible short in the stator or is the OBC messing me up?

04-12-2011, 05:57 PM	#12
shadowman The Last Moja Morani Join Date: Jan 2007 Location: jumping from cart to cart Posts: 8,975	Re: strange noise coming from curtis ifyou can jump the soleniod and cart runs i don,t think its an OBC do you happen to have another soleniod to slap in and try? .................

04-12-2011, 06:26 PM	#13
DIT Mobile Not Yet Wild Join Date: Feb 2011 Location: dublin ^.^ Posts: 35	Re: strange noise coming from curtis got a new solenoid and controller, same problem. solenoids click fine just no movement. batteries are good, signal is good, im lost :S

04-12-2011, 07:26 PM	#14
GLEEMO just leave me alone Join Date: Aug 2008 Location: Tennessee Posts: 5,643	Re: strange noise coming from curtis I can't imagin what the %^& would be going on with the motor , pop it off look for obvious heat issues, try spinning it , it could be obvious ! If U need i can dig up (I think) the old bench test diagram for the motor. let me know after U check it .

04-12-2011, 07:44 PM	#15
DIT Mobile Not Yet Wild Join Date: Feb 2011 Location: dublin ^.^ Posts: 35	Re: strange noise coming from curtis checked the motor ages ago, bench test, cleaned the rotor n stator, growler test, and all fine. im completely lost atm :p

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-13-2011, 07:33 AM	#16
shadowman The Last Moja Morani Join Date: Jan 2007 Location: jumping from cart to cart Posts: 8,975	Re: strange noise coming from curtis does cart have v-glide or pot?..............................

04-13-2011, 08:29 AM	#17
DIT Mobile Not Yet Wild Join Date: Feb 2011 Location: dublin ^.^ Posts: 35	Re: strange noise coming from curtis its originally a v glide type but have been using both the pot and v glide. and i know both of these devises are working 100% :P

Similar Threads
Thread	Forum
Don't let off the gas or strange hesitation...	Gas EZGO
Strange lift..	Lifted Golf Carts
G9 strange noise	Gas Yamaha
need help something strange happening ?	Electric EZGO