|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-22-2011, 08:36 AM | #1 |
Not Yet Wild
Join Date: Jul 2010
Posts: 14
|
1993 club car will not go
i have a 1993 36 volt club car with one solenoid that just stopped running
the solenoid has 36 volts to both large ends and ground to both small ends it also has been replaced with a new club car solenoid help |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-22-2011, 08:47 AM | #2 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 1993 club car will not go
Quote:
You need one + and one - at the small posts to make the solenoid work & the cart run. Let me know what happens. |
|
09-22-2011, 09:11 AM | #3 |
Not Yet Wild
Join Date: Jul 2010
Posts: 14
|
Re: 1993 club car will not go
ok i removed the white and black wire and the red wire on the same small terminal these should give me power when the pedal is pressed? if i power that small terminal the solenoid clicks but the motor does nothing in f or r but i have 36 volts on both large terminals all the time
|
09-22-2011, 09:15 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 1993 club car will not go
SO now you have power to Controller at B+ and B-? Is there also power at controller small spade #1?
|
09-22-2011, 09:30 AM | #5 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: 1993 club car will not go
i might be wrong but i don,t think the white, black and red wire should be mounted to the same terminal.........................................8 )
|
09-22-2011, 09:32 AM | #6 |
Not Yet Wild
Join Date: Jul 2010
Posts: 14
|
Re: 1993 club car will not go
i have power on both large terminals of solenoid and ground on both small terminals of solenoid the red wire on solenoid small terminal is going to the controller it has ground on it the small white and black wire that is with the red wire goes to the microswitch on the f&r lever this microswitch is dead and the microswitch on the pedal is dead
|
09-22-2011, 09:37 AM | #7 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: 1993 club car will not go
how did this start? did it break down or did you get the cart this way? has anyone else worked on it? something with those small wires dosn,t seem right...there should be a small wire that runs off one of the large post over to V-glide............................................. ......
|
09-22-2011, 09:58 AM | #8 |
Not Yet Wild
Join Date: Jul 2010
Posts: 14
|
Re: 1993 club car will not go
the cart has had the solenoid removed before i got it but looking at the wiring diagram it looks ok it was running fine and just wont go anymore i am wondering if the controller is grounding the wrong wire or something also what are the jumpers on the solenoid resistors or diodes can they be bad
|
09-22-2011, 10:04 AM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 1993 club car will not go
you have a - where you should have a +
Use you meter to test continuity and find where the wires in question go and what their function is. |
09-22-2011, 12:19 PM | #10 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: 1993 club car will not go
there should be a resistor and a diode and yes they can go bad.......also the diode goes on one way only......the silver band on it goes toward positive...................................
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1993 Club Car Help | Electric Club Car | |||
1993/'95 Club Car | Electric Club Car | |||
Wtb gas engine for 1993 club car | Golf Carts and Parts | |||
1993 Club Car - wants to keep running. | Gas Club Car | |||
1993 Club Car 36v | Electric Club Car |