|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
12-02-2015, 11:09 AM | #1 |
Not Yet Wild
Join Date: Aug 2013
Location: Northport, Alabama
Posts: 19
|
DS 48 not going forward/reverse
Been lurking for a while.
Club Car 48 volt won't go forward or reverse. The solenoid does not click to my knowledge. Only thing I hear clicking is the MCOR when pedal is pressed. I did notice I didn't turn key off when I charged it. Last time I used it, it seemed as if the acceleration was off per pressing the pedal. Checking things, and both wires going to key switch are carrying 8+ volts even though disconnected from switch. Solenoid voltage on both post was 8-10 volts with key on, pedal pressed, and in forward. I only tested with meter leads being: one on post of solenoid the another on metal, not on battery. I thought it was supposed to be 48 volts at large post on solenoid, but maybe this is when the other lead is on the opposite charge of the battery. Solenoid taken off, and no continuity between small post, large post or crossed. Each battery is reading between 8.2 to 8.5 volts. All batteries together are 50.2 volts. Fuse at charging port test fine with continuity, cables/ends are ok. two fuses off batteries are good. Thanks for the help in advance. God Bless, David B. Last edited by BOFF; 12-02-2015 at 11:29 AM.. Reason: added info |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-02-2015, 04:25 PM | #2 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: DS 48 not going forward/reverse
It don't look like the charge port wire is hooked up to main pack Pos. post
|
12-02-2015, 05:49 PM | #3 |
Not Yet Wild
Join Date: Aug 2013
Location: Northport, Alabama
Posts: 19
|
Re: DS 48 not going forward/reverse
|
12-02-2015, 06:06 PM | #4 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: DS 48 not going forward/reverse
Don't use metal, or frame to check voltage. Use pack neg for correct readings.
|
12-02-2015, 06:08 PM | #5 | |
Gone Wild
Join Date: Sep 2012
Location: Chestermere, Alberta - Canada
Posts: 1,146
|
Re: DS 48 not going forward/reverse
Quote:
Always use the main negative post for your ground / testing and reporting. You might want to re-do those tests and report the correct numbers (just to eliminate the odd numbers). OOPS - mrgolf types faster |
|
12-02-2015, 06:27 PM | #6 | |
Not Yet Wild
Join Date: Aug 2013
Location: Northport, Alabama
Posts: 19
|
Re: DS 48 not going forward/reverse
Quote:
Will be tomorrow before I have results. God Bless, David B. |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Forward/Reverse, drives forward then jumps in reverse | Electric EZGO | |||
2006 ezgo forward is reverse and reverse is forward please help | Electric EZGO | |||
Reverse alarm sounds in Forward, wont go forward or reverse | Electric Club Car | |||
Alarm sounding in forward. No movement in forward or reverse | Electric Club Car | |||
Forward Reverse switch melted on forward...have question about replacement part | Electric Club Car |