|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-23-2016, 08:30 AM | #1 |
Not Yet Wild
Join Date: Feb 2016
Posts: 29
|
06 precedent help please
i bought a 06 48v club car precedent from an auction and it didn't have batteries so i put 4 12v batteries and the cart does nothing no solenoid click or anything i am getting + to one large post and one small post on solenoid but not getting a negative on the other small post any ideas on what to try ?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-23-2016, 09:50 AM | #2 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 06 precedent help please
The on-board computer could be stuck in lockout mode. It happens from time to time and it almost always has to be replaced when this happens. There are also many other possible scenarios. If you care to talk about it feel free to call me at 706-836-7210. I'll walk you through some troubleshooting.
|
02-23-2016, 12:48 PM | #3 |
Not Yet Wild
Join Date: Feb 2016
Posts: 29
|
Re: 06 precedent help please
should there be a resistor on the solenoid ? there is not one
|
02-23-2016, 02:26 PM | #4 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: 06 precedent help please
|
02-23-2016, 04:30 PM | #5 |
Not Yet Wild
Join Date: Feb 2016
Posts: 29
|
Re: 06 precedent help please
yes stock controller
|
02-23-2016, 04:34 PM | #6 |
Gone Wild
Join Date: Aug 2009
Posts: 14,245
|
Re: 06 precedent help please
Ok, I believe it should have a resistor on the solenoid. I will send you a private message (PM) when you get the PM privileges. Now that you have three posts, you should be able to receive them.
|
02-23-2016, 05:08 PM | #7 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 06 precedent help please
Yes it should have a pre-charge resistor.
|
02-23-2016, 05:28 PM | #8 |
Not Yet Wild
Join Date: Feb 2016
Posts: 29
|
Re: 06 precedent help please
would the missing resistor stop the cart from working ?
|
02-23-2016, 08:02 PM | #9 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 06 precedent help please
No. But a shorted controller can cause the resistor to heat up and become hot as fire, and possibly make somebody want to remove it. I'm thinking that's probably what happened. Locate the Onboard computer. It's directly under the tow/run switch and it has a 6 pin connector on the back of it that's plugged into the wire harness. Unplug the six pin connector and use a paperclip to jump the white wire to the blue wire within the wire harness connector. This will bypass the Onboard computer. If the vehicle operates you'll know that you need an onboard computer. If it doesn't we'll have to keep testing.
|
02-23-2016, 08:24 PM | #10 |
Not Yet Wild
Join Date: Feb 2016
Posts: 29
|
Re: 06 precedent help please
i did the obc bypass and still no luck what should i do next ?
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Club Car Precedent Dual Action Heavy Duty Overload Leaf Spring For CC Precedent | Electric Club Car |