03-23-2023, 10:34 AM | #1 |
Not Yet Wild
Join Date: May 2020
Posts: 17
|
Ezgo workhorse lift
Can anyone tell me a to tell if the front axle is bent. It looks bent to me but others say it doesn’t. I didn’t know if anyone knows of an easy way of telling. I know this is kinda a stupid question but just trying to get ideas. It’s lifted and where the front anxiety drops down looks to be bent back a little bit. The tire on that side rubs the fender when turned and it doesn’t on the other side. I appreciate any help or recommendations.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-23-2023, 11:24 AM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,146
|
Re: Ezgo workhorse lift
The axle should be in the same plain all the way across if it is a stock axle.
|
03-23-2023, 11:55 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: Ezgo workhorse lift
Both sides should be the same. Any discrepancy especially towards the rear of the cart is likely collision damage. Check to see both sides are mounted in the same location relevant to the shackles.
|
Tags |
axle, ezgo, lift kit, workhorse |
|
|
Similar Threads | ||||
Thread | Forum | |||
ISO EZGO Workhorse factory lift | Golf Carts and Parts | |||
97 workhorse lift | Gas EZGO | |||
Ezgo workhorse 2008 lift kit 48v/gas | Electric EZGO | |||
Jakes lift for 99 ezgo workhorse 800 | Lifted Golf Carts | |||
Need a lift kit for 88 EZGO Workhorse | Gas EZGO |