|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-02-2020, 07:12 PM | #1 |
Not Yet Wild
Join Date: Jul 2014
Posts: 31
|
E-Z-Go series 36v cont
Hi I'm replacing my 95 medalist four tab E-Z-Go series controller with a rebuilt three tab. Where do I relocate the A2 wire to? TYIA
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-03-2020, 05:52 AM | #2 |
Gone Wild
Join Date: Nov 2011
Location: S.E. Mi.
Posts: 531
|
Re: E-Z-Go series 36v cont
The 2 wires that were on the A2 can be connected together with a nut and bolt and then insulated or you can make a new cable to replace them.
|
09-03-2020, 06:42 AM | #3 |
Gone Wild
Join Date: Sep 2010
Location: Florida
Posts: 1,895
|
Re: E-Z-Go series 36v cont
Indeed I usually just use the old nut and bolt from the old A2 post on your old controller and bolt them together, wrap em in electrical tape and zip tie away from other wiring...or like handtools says get one long wire to replace otherwise...
|
09-03-2020, 04:19 PM | #4 |
Not Yet Wild
Join Date: Jul 2014
Posts: 31
|
Re: E-Z-Go series 36v cont
Well the problem with that theory is there is only one wire on the A2 post of the series controller which runs to the C post on the FnR switch which has a wire from C post to A2 motor stud
|
09-03-2020, 04:21 PM | #5 |
Not Yet Wild
Join Date: Jul 2014
Posts: 31
|
Re: E-Z-Go series 36v cont
I cannot find a wiring diagram anywhere on the internet of a newer 3 post series controller all the diagrams show a 4 post
|
09-03-2020, 07:05 PM | #6 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: E-Z-Go series 36v cont
Quote:
It is exactly the same schematic with the A2 terminal and cables erased. |
|
09-03-2020, 08:13 PM | #7 |
Gone Wild
Join Date: Nov 2011
Location: S.E. Mi.
Posts: 531
|
Re: E-Z-Go series 36v cont
Then you can just eliminate the wire that goes from A2 on the controller to the F/R post C.
|
09-04-2020, 04:03 PM | #8 |
Not Yet Wild
Join Date: Jul 2014
Posts: 31
|
Re: E-Z-Go series 36v cont
Thank you so very much that's exactly what I needed
|
Tags |
series 4 tab to 3 tab |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Cont red wire fus box | Electric Club Car | |||
EZGO Txt Upgrade cont | Electric EZGO | |||
Alltrax SPM-48500 Series Controller (Brand New in Box) (Complete pkg or Cont. Only) | Golf Carts and Parts | |||
EZGO 36 Volt HD 400 amp Cont. 1,000 Amp Peak Solenoid | Golf Carts and Parts | |||
Wiring a new Alltrax 4855 Cont for Ez-GO | Electric EZGO |